Best current price£18.55from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£18.55Visit shop Liqui Moly 6106 Stone Chip Cover 1L: Thick Flexible Anti-Corrosion...
Visit shop1 offer from £18.55
View price history by clicking the chart icon.
This Liqui Moly Stoneguard in Grey (1L) is for automotive enthusiasts and DIY mechanics seeking robust protection for vehicle undercarriages and body panels. Its key benefit is providing a durable, corrosion-resistant, and abrasion-proof coating with excellent stone chip protection and sound dampening. A caveat is that its effectiveness relies on proper surface preparation and application technique.
| Colour | Grey |
|---|---|
| Model Part Number | 6106 |
| Brand | Liqui Moly |
Drying time varies based on temperature, humidity, and application thickness. Refer to the product's technical data sheet for specific recommendations. Generally, it is quick drying, but full curing takes longer.
Yes, but only after the plastic has been properly prepared with a suitable primer or filler. Adhesion to bare plastic may be poor.
Clean overspray and tools immediately after application using a suitable solvent before the coating hardens.
Typically, 2-3 coats are recommended for optimal stoneguard and corrosion protection. The exact number depends on the desired level of protection and the surface being treated.
Yes, the dried film provides excellent protection against corrosion when applied to properly prepared metal surfaces.
Yes, by mixing the product with the original paint, you can color it to match any shade desired for a custom finish.
A spray gun designed for viscous materials is recommended to ensure proper atomization and application of the thick coating.
Ensure the spray gun is appropriate for viscous materials and set to the correct pressure. Check for blockages in the nozzle. Maintain a consistent spray distance.
Re-evaluate surface preparation. Ensure the surface was completely clean, dry, and free of contaminants. A primer may be necessary for certain substrates.
Ensure application occurs within recommended temperature and humidity ranges. Avoid applying too thickly, as this can impede drying.
Verify the product has been allowed to cure fully. Ensure adequate coats were applied to achieve the recommended film thickness for abrasion resistance.
Preparation: Ensure the surface to be treated is clean, dry, and free from rust, grease, and loose paint. For best results, sand any rough areas and prime bare metal or certain plastics.
Application: Apply using a spray gun designed for viscous materials. Maintain an even distance from the surface and use overlapping passes for uniform coverage. Several thin coats are generally better than one thick coat. Allow adequate drying time between coats as per manufacturer recommendations.
Compatibility: The dried coating adheres well to unpainted and painted sheet steel. It also adheres to plastics that have been coated with primer or filler. The product is compatible with most commercially available paint systems for overcoating.
Care: Once fully cured, the coating is resistant to abrasion and solvents. Clean tools and any accidental spills immediately after application with a suitable solvent. The finished surface can be cleaned using standard automotive cleaning methods.
