Bartoline Boiled Linseed Oil - 5L

Bartoline Boiled Linseed Oil is specifically formulated for use on softwoods. It is ideal for garden furniture made from woods like pine or cedar.

No, this product is not recommended for hardwoods like Oak or Teak. For these types of wood, you should use a specialized product such as Teak Oil.

For the best results and optimal protection, it is recommended to apply 2 to 3 coats. Allow approximately 24 hours of drying time between each coat.

You should allow at least 24 hours between applying coats to ensure proper drying and absorption into the wood.

Application cloths soiled with linseed oil can be a fire hazard due to spontaneous ignition. Immediately after use, wash all cloths thoroughly with soapy water and dispose of them safely outdoors.

Clean brushes and other equipment immediately after use with White Spirit.

While the oil protects wood from drying out due to sun exposure, it does not contain specific UV inhibitors for color protection. It primarily focuses on maintaining wood's structural integrity and appearance.

Excess oil was not removed properly. Wipe down the surface with a clean cloth dampened with White Spirit to remove the tacky residue. Ensure adequate drying time in a well-ventilated area.

The wood may have absorbed the oil quickly and requires further coats. Apply additional coats as per the instructions, allowing sufficient drying time between each.

This product is not intended for hardwoods. Use a product specifically designed for hardwoods, such as Teak Oil.