Maglite Magnum Star II Xenon Replacement Bulb - 3 Cell
Best current price£9.78from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£9.78Visit shop Maglite 3 Cell Magnum Star Xenon Ii Replacement Bulb
Visit shopOnBuy.com£9.78Visit shop One Offer
1 offer from £9.78
View price history by clicking the chart icon.
OnBuy.comMaglite 3 Cell Magnum Star Xenon Ii Replacement Bulb
Free delivery in 1–3 days
£9.78
Visit shop
Product Information
Full details
The Maglite Magnum Star II Xenon Replacement Bulb is designed for owners of 3-cell non-LED Maglite C and D flashlights who want to restore or enhance their torch's brightness. This third-generation bi-pin bulb delivers a significant boost in luminosity compared to older standard bulbs, making it a cost-effective way to revitalize aging equipment. A key caveat is that this bulb is strictly for 3-cell models only; using it with a different battery configuration will result in poor performance or immediate bulb failure.
All features
| Colour | White |
|---|---|
| Model Part Number | LMXA301 |
| Brand | Maglite |
Extended Product Information
FAQs
Can I use this bulb in my 2-cell Maglite?
No. This specific bulb is rated for 3-cell Maglites. Using it in a 2-cell model will lead to improper brightness or bulb failure.
Is this an LED bulb?
No, this is a Xenon incandescent replacement bulb designed for original, non-LED Maglite flashlights.
How do I know if my Maglite is an LED or non-LED model?
Non-LED models have a standard incandescent bulb holder. If your flashlight came from the factory with a white LED module, this bulb is not compatible.
Does it matter if I have a C-cell or D-cell flashlight?
As long as it is a 3-cell model and is not an LED version, this bulb is compatible with both C-cell and D-cell Maglite torches.
Why should I avoid touching the glass bulb with my fingers?
Skin oils can create hot spots on the glass surface when the bulb heats up, which can significantly shorten the lifespan of the bulb.
Troubleshooting
Bulb does not light up after installation
Check that the bi-pin base is fully seated in the socket and ensure your batteries have sufficient charge.
Beam appears dim or yellow
Verify that your batteries are fresh and check the internal reflector for dirt or smudges that may be blocking the light output.
Pros and Cons
Pros
- Significantly brighter than standard original bulbs
- Easy to install with no special tools required
- Cost-effective alternative to buying a new flashlight
- Genuine official Maglite replacement part
Cons
- Compatible only with non-LED Maglite flashlights
- Specific to 3-cell battery configurations only
- Fragile glass component requires careful handling
Setup, Compatibility & Care
Before installation, ensure your flashlight is turned off. To install, unscrew the flashlight head, remove the old bulb by pulling it straight out of the bi-pin socket, and press the new Magnum Star II bulb firmly into place. Do not touch the glass of the new bulb with bare fingers, as oils from your skin can cause the bulb to overheat or fail prematurely; use a clean cloth to handle the bulb during insertion. This bulb is strictly for non-LED models; attempting to install this in an LED-equipped Maglite will not work as the electrical contacts are completely different.