Sylglas Plumber Fix - Steel

The steel variant is specifically formulated for optimal adhesion and strength on steel pipes and components. The copper variant is designed for copper pipes. Using the wrong variant may result in a weaker or ineffective seal.

The putty begins to harden within minutes and becomes workable for about 5-10 minutes. It cures hard in approximately 1 hour, and achieves its full strength after 24 hours.

No, this product is specifically designed for metal pipes, particularly steel. It is not recommended for use on plastic components.

Use enough putty to thoroughly cover the damaged area and create a substantial patch that extends beyond the leak on all sides. Ensure it is pressed firmly into place.

While it provides a strong seal, always check the product packaging for specific potable water approvals. It is generally designed for non-potable water systems and heating systems.

Once fully cured, the repair can typically withstand temperatures commonly found in domestic heating and water systems. Avoid use in extreme high-temperature applications.

Ensure you are working with the correct variant for the ambient temperature. If very cold, warming the tube slightly in your hands may help. Ensure the product has not expired.

The surface may not have been cleaned or dried properly, or the putty was not applied with sufficient pressure. Remove the putty, re-clean and dry the area, and reapply.

Ensure the putty was kneaded sufficiently to mix the components. Check the product's expiry date, as old putty may not cure properly. Ensure ambient temperature is within the recommended range for curing.