Best current price£13.29from B&Q
Shopping.co.uk recommended and popular offers
B&Q£13.29Visit shop B&Q - Sanding Belts 75mm X 533mm Belt Sander 60 Grit Abrasive Aluminum Oxide For Grinding Sharpening Derusting Wood Paint 10X
Visit shop1 offer from £13.29
View price history by clicking the chart icon.
Designed for woodworkers and DIY enthusiasts, the Dapetz 60 grit sanding belts are an essential choice for those needing rapid material removal and surface preparation. These belts provide a high-performance solution for leveling uneven timber, removing old varnish, or shaping projects, though their coarse 60 grit texture makes them better suited for initial heavy sanding rather than fine surface finishing.
| Model Part Number | DP01364 |
|---|---|
| Brand | Dapetz |
Yes, as long as your specific Makita model requires a 75mm x 457mm belt, this product will fit.
They are suitable for light metals, but be aware that metal sanding will wear down the grit faster than wood.
No. 60 grit is quite coarse and will leave visible scratch marks. Use a finer grit (120+) for final smoothing.
Look for a directional arrow printed on the inside of the sanding belt and match it to the rotation direction of your tool.
No. Sanding wet wood will cause the dust to turn into a paste, which will immediately clog the abrasive and ruin the belt.
Check the tracking adjustment knob on your sander to ensure the rollers are aligned correctly.
Ensure the sanding pressure is applied evenly and the belt was installed in the correct direction of rotation.
Clean the belt surface with a sanding belt cleaning stick and ensure you are not using too much pressure on painted surfaces.
To install, ensure your belt sander is unplugged. Release the tension lever, slide the 75mm x 457mm belt onto the rollers, and ensure the directional arrow on the inside of the belt matches the rotation of your sander. Re-engage the tension and run the sander for a few seconds to verify the belt is centered. To maximize the life of your Dapetz belts, clear away excess dust using a rubber cleaning block after every hour of use. Store the belts in a cool, dry place; high humidity can compromise the resin bonding and lead to premature failure of the seam.
