Submersible Deep Well Pump - 6000 l/h - 370 W - 43 m lift
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Super Merchant MSW Submersible Deep Well Pump is an essential tool for homeowners, gardeners, and agricultural users who need to extract clean water from deep or narrow sources. With its compact 95 mm diameter, this pump excels at reaching water in narrow boreholes, cisterns, and tanks while providing a robust flow rate of 6000 l/h. While it offers excellent durability and high-pressure lift, users should note that it is designed exclusively for fresh water up to 35 °C and should not be used for pumping debris-filled or chemically treated water.
All features
| Model Part Number | 10060171 |
|---|---|
| Brand | Super Merchant |
Extended Product Information
FAQs
Can this pump be used in a saltwater well?
No, this unit is designed specifically for fresh water use and may corrode if exposed to saltwater.
What is the maximum diameter borehole required?
The pump housing is 95 mm in diameter, so it requires a borehole with an internal diameter slightly larger than 95 mm to ensure proper clearance.
Does it need a filter?
While the pump has a protective intake, it is highly recommended to use a external pre-filter if your well water contains sand or sediment to prevent premature impeller wear.
Is the control box waterproof?
The control box is designed for safe operation but should be kept in a dry location, away from the direct water source and excessive humidity.
What is the warranty period?
Warranty terms vary by region and retailer; please refer to the documentation provided by your specific merchant at the time of purchase.
Can I leave the pump in the well year-round?
Yes, the corrosion-resistant housing is designed for long-term submersion, provided the water remains within the specified temperature range and is free of abrasive debris.
Troubleshooting
The pump is powered on but does not move any water
Verify that the pump is fully submerged and that the discharge hose is not kinked or blocked.
Motor hums but the pump does not start
Check the power supply and ensure the control box is correctly connected; if the issue persists, ensure the impeller is not jammed by debris.
Pros and Cons
Pros
- Fits into narrow boreholes thanks to the compact 95 mm housing
- High delivery height of up to 43 m
- Sturdy, corrosion-resistant build quality
- Generous 20 m power cable for deep installation flexibility
Cons
- Limited to fresh water only (not suitable for sandy or silty water)
- Maximum operating temperature restricted to 35 °C
- Requires professional installation if wiring into permanent water systems
Setup, Compatibility & Care
Installation requires a secure mounting point that prevents the pump from touching the bottom of the well, which could result in the intake of sediment. Ensure the pump is fully submerged within the water source before powering it on to prevent dry running, which can damage the motor seals.
Compatibility Note: This pump is designed for clear, fresh water. Avoid placing it in water with high concentrations of sand, sludge, or heavy mineral deposits to maintain longevity.
Care Instructions:
- Periodically check the exterior housing for signs of corrosion or impact damage.
- Ensure the control box is installed in a dry, ventilated area, away from direct moisture.
- During periods of inactivity, it is recommended to pull the pump up, clean the exterior, and store it in a dry location if possible.