Primaflow Prima Classic Compression Elbow - 15mm x 3/4 Male

WRAS (Water Regulations Advisory Scheme) approval means the product has been checked and meets the strict standards for materials and construction used in public water supply systems in the UK. It ensures the fitting is safe for use with drinking water.

Yes, brass compression fittings made to EN 1254 are generally suitable for gas installations. However, always ensure compliance with local gas safety regulations and standards for your specific installation.

Compression fittings use nuts and olives that are tightened onto the pipe to create a seal, requiring tools. Push-fit fittings simply require the pipe to be pushed into the fitting for an instant, tool-free connection.

Tighten firmly with two wrenches until resistance stops, then typically an additional quarter to half turn. Over-tightening can damage the olive or fitting, while under-tightening can cause leaks. Refer to manufacturer guidelines if available.

This fitting is designed for a 15mm diameter pipe on one end and has a 3/4" male thread on the other.

Yes, you will need two adjustable wrenches or pipe wrenches to tighten the compression nut securely.

Ensure the pipe is fully inserted, the olive is correctly positioned, and the compression nut is tightened sufficiently. Check for damage to the pipe or fitting. If the leak persists, the olive or fitting may need replacement.

Ensure the threads are clean and free from debris. Use appropriate wrenches to apply steady, even pressure. Do not force the nut if significant resistance is met, as this may indicate cross-threading or a damaged component.

Re-cut the pipe end squarely and ensure it is smooth. Compression fittings require a clean, flat surface for the olive to create a seal.