Best current price£79.51from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£79.51Visit shop 25X8.00-12 (205/80-12) 4Ply Atv Tyre P3080 Obor Pinacle 61K E-Marked Road Legal 5056116826947
Visit shop
B&Q£79.89Visit shop B&Q - 25X8.00-12 (205/80-12) 4Ply Atv Tyre P3080 Pinacle 61K E-Marked Road Legal
Visit shop3 offers from £79.51 - £95.41
View price history by clicking the chart icon.
This OBOR P3080 "Pinacle" ATV tyre is designed for riders seeking reliable all-terrain performance and road legality in Europe and the UK. Its key benefit is a balanced tread pattern that enhances steering stability and ride comfort, making it suitable for various conditions. A potential caveat to consider is its 4-ply rating, which may be less durable than higher ply tires for extreme off-road use. This tubeless front tyre offers a 61K speed and load rating, E-marked compliance, and a deep 15mm tread for longevity.
| Model Part Number | P3080 |
|---|---|
| Brand | OBOR |
The P3080 "Pinacle" is an all-terrain tyre designed for a mix of surfaces, including trails, gravel, and moderate off-road use. Its 4-ply rating offers durability for general use, but for extreme rock crawling or very aggressive mud conditions, a higher ply rating might be more suitable.
The recommended maximum tyre pressure for this OBOR tyre is 10 PSI.
No, this tyre is specifically designed and sized for the front axle of an ATV. You will need a compatible rear tyre for your ATV.
The E-Mark (E4-75R-0017365) signifies that the tyre meets the technical requirements and safety standards set by the European Union, making it legal for use on public roads in Europe and the UK.
The tread depth on the OBOR P3080 Pinacle tyre is 15mm.
The tyre has a Speed & Load Rating of 61K, which means it can support a maximum load of 257 kgs and a maximum speed of 110 km/h.
Check the bead seal between the tyre and the rim. Ensure the rim is clean and free of damage. Verify the valve stem is properly seated and not leaking. If the issue persists, the tyre may have a puncture.
Check and adjust wheel alignment and suspension settings on your ATV. Ensure tyre pressures are consistently maintained at 10 PSI. Rotate tyres if possible, though this is a front-specific tyre.
Verify the tyre is properly balanced. Ensure the tyre is correctly seated on the rim and inflated to the recommended pressure. Inspect for any damage or irregularities on the tyre surface.
Setup: Ensure the tyre is mounted on a compatible 12-inch rim. Always follow standard tyre mounting procedures. After mounting, inflate the tyre to the recommended pressure, which is a maximum of 10 PSI.
Compatibility: This is a 25x8.00-12 tyre, specifically designed for the front axle of ATVs. Verify that your ATV's front wheel hub and suspension can accommodate a tyre with an overall diameter of approximately 642mm (25.3 inches) and a width of 183mm (7.2 inches).
Care: Regularly inspect the tyre for signs of wear, cuts, or embedded objects. Maintain the recommended tyre pressure of 10 PSI for optimal performance and to prevent premature wear. Clean the tyre with mild soap and water; avoid harsh chemicals that could degrade the rubber. Store the ATV with tyres not under load if possible, or rotate them periodically.
