SIRUI AM Carbon Fiber Tripod - Two-Section Carbon Fiber Center Column
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The SIRUI AM Carbon Fiber Tripod Kit is designed for photographers seeking a lightweight, durable, and versatile support solution for travel and close-up work. Its primary benefit is the combination of robust carbon fiber construction with a highly adjustable height range, all within a compact form factor. A potential caveat is its maximum load capacity, which may not be sufficient for very heavy professional camera setups without careful consideration. This kit includes a 5-section tripod and an extendable center column, offering flexibility for various shooting heights and conditions.
All features
| Brand | Sirui |
|---|
Extended Product Information
FAQs
What is the maximum height of the tripod with the center column?
With the SL-100 center column attached and extended, the maximum height is approximately 47.2 inches (1200mm).
What is the minimum height for macro photography?
The tripod can be set to a minimum height of 2.75 inches (70mm).
What is the weight capacity of the tripod?
The maximum load capacity for the AM-225 tripod is 6kg (13.2 lbs).
Can I use this tripod in wet conditions?
Yes, the carbon fiber construction is corrosion-resistant. However, it's recommended to clean and dry it with fresh water after exposure to saltwater or harsh chemicals.
Does it come with a tripod head?
This product is a tripod kit and does not include a tripod head. You will need to purchase a compatible head separately and mount it to the tripod's 3/8" thread.
How do I attach the spikes?
The rubber feet on the tripod legs can be unscrewed. The stainless steel spikes can then be screwed into the same mounting point.
What is the retracted height of the tripod?
The tripod's retracted height (without the center column) is 15.4 inches (390mm).
Troubleshooting
Legs are stiff or difficult to adjust
Ensure the twist-locks are fully loosened. Clean any dirt or grit from the leg sections and twist-lock mechanisms. If the issue persists, a small amount of silicone lubricant can be applied to the threads of the twist-locks.
Tripod feels unstable
Check that all leg locks and the center column lock are fully tightened. Ensure the leg angles are set appropriately for the terrain. For soft ground, use the included stainless steel spikes. Avoid exceeding the maximum load capacity.
Center column won't extend or retract smoothly
Loosen the center column's base lock completely. Check for any obstructions. Clean the center column sections and re-tighten the lock firmly but not excessively.
Camera mount is loose
Ensure the correct screw (1/4" or 3/8") is securely fastened to your camera's mounting point and then threaded into the tripod's head or center column mounting stud. Tighten firmly.
Pros and Cons
Pros
- Extremely lightweight and portable due to carbon fiber construction.
- Offers a very wide height range, suitable for both low-angle macro and standing height shooting.
- Durable and corrosion-resistant, making it suitable for outdoor and harsh conditions.
- Quick setup and adjustment with twist-lock legs.
- Included center column provides extra height and value.
- Stable on various surfaces with the option to use included spikes.
Cons
- Maximum load capacity of 6kg (13.2 lbs) might be limiting for very heavy camera and lens combinations.
- The twist-lock mechanism can potentially collect dust or debris over time if not maintained.
- The minimum height of 2.75 inches, while good for macro, might still be too high for some extreme low-angle shots.
- Requires assembly of the center column, which is an extra step.
- No dedicated leveling bubble on the tripod legs.
Setup, Compatibility & Care
Setup:
- Extend the 5-section legs by twisting the locks counter-clockwise and pull them to the desired length.
- Adjust the leg angle using the 3-position lock mechanism.
- To add height, attach the SL-100 center column to the tripod's apex. Extend the center column by twisting its base lock.
- Mount your camera or head onto the 3/8" screw (or use the 1/4" adapter if needed).
- For outdoor use, remove the rubber feet and screw in the provided stainless steel spikes.
Compatibility:
The tripod features a standard 3/8" mounting thread, which is compatible with most professional tripod heads. The included interchangeable 1/4" and 3/8" 2-in-1 screw ensures broad compatibility with a vast range of cameras and accessories.
Care:
- Clean the carbon fiber legs and twist-locks with a soft, damp cloth. Avoid abrasive cleaners.
- Periodically check and clean any debris from the twist-lock mechanisms to ensure smooth operation.
- Store the tripod in a dry place when not in use.
- If used in saltwater or corrosive environments, rinse with fresh water and dry thoroughly.