Keeley Electronics RK2000 Funk Siren Delay Effects Pedal
Best current price£351.43from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£351.43Visit shop Keeley Electronics RK2000 Funk Siren Delay Effects Pedal
Visit shopeBay£351.43Visit shop All Offers
2 offers from £351.43 - £370.00
View price history by clicking the chart icon.
eBayKeeley Electronics RK2000 Funk Siren Delay Effects Pedal
Free delivery in 1–3 days
£351.43
Visit shop
Keeley Electronics RK2000 Funk Siren Delay Effects Pedal (NEW)Free delivery in 1–3 days£370.00Visit shop →
Product Information
Full details
The Keeley RK2000 Funk Siren Delay is for guitarists seeking vintage rack delay sounds with modern versatility. Its key benefit is faithfully recreating the legendary 1983 DM2000 rack unit's 12-bit character and unique Hold feature, offering a wide sonic palette from clean delays to gritty tape echoes and atmospheric soundscapes. A potential caveat for some users might be its deep feature set, requiring some exploration to master.
All features
| Model Part Number | KE-RK2000 |
|---|---|
| Brand | Keeley |
Extended Product Information
FAQs
What is the key difference between the RK2000 and a standard delay pedal?
The RK2000 faithfully recreates the vintage 12-bit digital delay sound of the 1983 DM2000 rack unit, featuring a unique Hold function, dramatic modulation, and pitch-shifting capabilities that go beyond typical delay effects.
How do I activate the Hold feature?
Press and hold the Tap/Hold footswitch for approximately one second. This will freeze the current delay signal, allowing you to manipulate it further with modulation or pitch shifting.
Can I save my favorite settings?
Yes, the RK2000 features adjustable presets. You can dial in your desired sounds and store them for quick recall.
What type of power supply does the RK2000 require?
It requires a standard 9V DC center-negative power supply with a 2.1mm barrel connector. Ensure the supply can provide at least 100mA of current.
Does the pedal support stereo operation?
While the pedal has stereo outputs, the primary delay effect is mono. However, features like pitch-shifting and modulation can create a wider stereo image.
Can I use an expression pedal with the RK2000?
Yes, the RK2000 has an expression pedal input, allowing for real-time control over parameters such as delay time, modulation depth, or filter cutoff.
What is the maximum delay time?
The pedal can provide up to one second of delay time, with extensive control over filtering and modulation to expand its sonic range.
Troubleshooting
No sound or weak signal
Check that all audio cables are securely connected to the correct input and output jacks. Verify the power supply is connected and providing adequate voltage/current. Ensure the pedal is not bypassed (check footswitch status).
Delay effect not engaging
Confirm the footswitch has been pressed to engage the effect. Check that the delay time is not set to zero. If using presets, ensure the correct preset is loaded.
Hold function not working as expected
Ensure you are pressing and holding the Tap/Hold footswitch for at least one second to engage the Hold mode. Experiment with different sounds to see how they are affected.
MIDI control not functioning
Verify MIDI cables are correctly connected (In to Out, Out to In). Ensure the MIDI channel settings on both the RK2000 and your controller/sequencer match. Check the RK2000's manual for specific MIDI implementation details.
Noisy or distorted sound
Check for ground loops by ensuring all audio equipment is plugged into the same power strip or circuit. Try a different power supply, as some power supplies can introduce noise. Ensure input gain is not too high.
Pros and Cons
Pros
- Authentic recreation of a classic, sought-after rack delay sound.
- Innovative Hold function provides unique creative possibilities.
- Extensive modulation and pitch-shifting options for sonic exploration.
- Modern connectivity with MIDI and expression pedal support.
- High-quality build and versatile sound design capabilities.
Cons
- The extensive feature set may have a learning curve for new users.
- May produce a grittier, more characterful sound than pristine digital delays.
- Requires a compatible power supply (not always included).
Setup, Compatibility & Care
Setup: Connect your instrument to the "Input" jack and your amplifier to the "Output" jack using standard instrument cables. Power the pedal using a standard 9V DC center-negative power supply (2.1mm barrel connector). Ensure your power supply can provide sufficient current (typically 100mA or more). Use the "Tap/Hold" footswitch to tap in delay times or press and hold to activate the Hold function. MIDI In/Out connections can be made with standard 5-pin DIN MIDI cables to connect to external MIDI controllers or sequencers. An expression pedal can be connected to the "Exp." jack for real-time control.
Compatibility: The RK2000 is designed primarily for electric guitar but can be used with other instruments like bass, keyboards, or synthesizers. It is compatible with most standard pedalboard power supplies and MIDI control systems. Use standard 1/4" instrument cables for audio connections.
Care: Keep the pedal clean by wiping it with a dry or slightly damp cloth. Avoid exposing it to excessive moisture, extreme temperatures, or direct sunlight. Ensure all cables are securely connected but do not overtighten jacks. Store in a dry, safe place when not in use.