Greenworks Grass Strimmer Trimmer Spool and Dual Line - 1.65mm x 5m

No, this is a non-genuine replacement spool and line manufactured by Ufixt, designed to be compatible with specific Greenworks models.

The line diameter is 1.65mm, and the length of the line on the spool is 5 meters.

It is compatible with several Greenworks models including WG150, WG163, ST40B410, and others listed in the compatibility section. Always check your strimmer's manual or the compatible model list.

Installation involves removing the spool cap, replacing the old spool with the new one, ensuring the line is threaded through the eyelets, and then reattaching the spool cap securely. Refer to your strimmer's user manual for detailed steps.

The 1.65mm line is suitable for grass and light to medium weeds. For very thick or tough vegetation, you may need a spool with a thicker gauge line.

Ensure the line is not worn or damaged. Check for any obstructions in the trimmer head or around the eyelets. If the issue persists, it may indicate a problem with the trimmer itself or the need for a different line gauge.

Ensure the line is properly threaded through the eyelets and that the spool is seated correctly. Check for any tangles or knots in the line and manually unwind if necessary.

Verify that the line is feeding out correctly and is not worn down too much. Ensure the spool is correctly installed and the trimmer head is functioning as expected.

Check for debris or damage around the spool cap and housing. Ensure you are aligning the cap correctly with the trimmer head before attempting to secure it.