Best current price£4.50from eBay
Shopping.co.uk recommended and popular offers
eBay£4.50Visit shop Deta S1300P 45A Dp Red Switch Slimline With Neo
Visit shop
B&Q£13.05Visit shop B&Q - S1300P Slimline Double Pole Switch With Neon 1 Gang 50 Amp
Visit shop2 offers from £4.50 - £13.05
View price history by clicking the chart icon.
This Deta Slimline Double Pole Switch (S1300P) is designed for electricians and homeowners needing a reliable switch with a neon indicator for higher current applications. Its key benefit is the 45-amp rating, suitable for demanding circuits, while a caveat is its specific fixing center requirement which needs careful measurement during installation.
| Model Part Number | S1300P |
|---|---|
| Brand | Deta |
Double Pole means the switch disconnects both the live and neutral wires simultaneously, providing a complete isolation of the circuit. This is a safety feature for higher-rated appliances and circuits.
While it can be used, its 45-amp rating and double pole functionality are typically intended for higher-load circuits. A standard single pole switch is usually sufficient for basic lighting.
You need to measure the distance between the screw holes used to fix the switch. This switch requires 60.3mm fixing centres. If your existing back box has this measurement, it should be compatible.
Installation of electrical components, especially those with higher amperage ratings like the S1300P, should ideally be carried out by a qualified electrician to ensure safety and compliance with regulations.
The neon indicator glows when the switch is in the ON position, providing a visual cue that power is being supplied to the connected circuit.
The neon indicator uses a very small amount of power, typically negligible in the overall energy consumption of a household circuit. It is designed for visual indication rather than significant power draw.
Typically, the neon indicator requires a permanent live connection in addition to the switched live. Refer to the wiring diagram provided with the product or consult an electrician for precise connection details.
Check that the switch is correctly wired for the neon function (usually requires a permanent live connection). Ensure the bulb itself has not failed. Verify the circuit is indeed powered ON.
Ensure no wiring is obstructing the mechanism. Check that the switch is securely but not over-tightened to the back box. If the problem persists, the unit may be faulty and should be replaced.
Immediately turn off the power at the consumer unit. This indicates a serious fault. The switch should be inspected and likely replaced by a qualified electrician. Do not use the switch.
Confirm that both live and neutral terminals are correctly wired. Ensure the switch is fully engaged in the OFF position. If the issue persists, the internal contacts may be damaged, and the switch requires replacement.
Setup:
Compatibility: This switch is designed for standard UK domestic and commercial wiring systems. It is compatible with back boxes that feature 60.3mm fixing centres. Always consult a qualified electrician to ensure compatibility with your specific electrical setup and local regulations.
Care:
