Blackmagic ATEM Advance Camera Control Unit

The panel is designed to control Blackmagic URSA Broadcast, URSA Mini, Blackmagic Studio Camera, and Blackmagic Micro Studio Camera models.

You can control up to four cameras concurrently from a single ATEM Camera Control Panel.

The panel connects directly to ATEM switchers via Ethernet. You can loop the Ethernet connection if you have multiple ATEM devices.

Yes, the panel allows you to save and recall 'scene presets' for individual cameras, which is useful for quickly matching settings or recalling optimal configurations.

These controls allow you to adjust the Red, Green, and Blue channels independently in both the white (gain) and black (pedestal) levels. This is crucial for fine-tuning color balance and correcting color casts between different cameras.

Yes, the ATEM Camera Control Panel features a compact design suitable for placement on a desktop or for mounting in a rack shelf.

Yes, the ATEM Camera Control Panel is compatible with all ATEM switcher models.

Verify Ethernet cable connections between the panel and ATEM switcher. Ensure the ATEM switcher is powered on and configured correctly. Check that the cameras are compatible models and properly connected to the switcher.

Confirm the correct camera is selected on the control panel. Restart the ATEM switcher and the control panel. Check for firmware updates for both the panel and the cameras.

Utilize the scene preset functions to load saved settings. Carefully adjust individual RGB gain and pedestal controls for each camera. Ensure proper white balance is set for all cameras.

Check the 'Coarse Control' setting to limit the range if necessary. Ensure the joystick area is clean and free from obstructions. Restart the panel.