Pisces Replacement Filter Foam Set - Fishmate 10000/15000

It is recommended to replace the Pisces Replacement Filter Foam Set every 6 months to maintain optimal filtration efficiency and pond health.

No, these replacement foams are specifically designed for the Fish Mate 10000 and 15000 Powerclenz filter systems only.

It is best to avoid washing with tap water, as chlorine can harm beneficial bacteria. If rinsing is necessary between replacements, use only pond water or dechlorinated water.

The coarse foam captures larger debris, while the medium foam traps finer particles. Together, they provide comprehensive mechanical filtration for your pond.

The dimensions are approximately 25.4 x 21.6 cm (10" x 8.5"), with an inner hole diameter of 14 cm.

Yes, by effectively trapping algae and other particulate matter, these foams help to reduce green water and improve overall water clarity.

The filter foam may be clogged. Check the replacement schedule; if it's been over 6 months, replace the foam. If it's newer, gently rinse the foam with pond water to remove excess debris.

Ensure the foam is installed correctly and fits snugly to prevent water bypass. Check if the filter system is adequately sized for the pond volume. Persistent cloudiness might indicate other issues like poor water circulation or excessive organic load.

This could indicate the foam is older than recommended for replacement or has been cleaned too aggressively. Replace the foam set and ensure only gentle rinsing with pond water is performed if necessary between full replacements.