Serene Valley Sink Bottom Grid - NDG2715R

You must measure the bottom of your sink basin accurately. The grid dimensions are 26-3/8" X 14-7/16" with a 3/8" corner radius. A video tutorial is available on the product listing to guide you through the measurement process. If in doubt, contact the manufacturer.

The grid is constructed from premium 304 stainless steel.

Yes, by elevating dishes and cookware, the grid allows water to flow freely to the drain, improving drainage and reducing standing water in the sink basin.

The grid weighs 2.82 pounds.

It is designed for sinks that match its specific dimensions (26-3/8" X 14-7/16" with 3/8" corner radius) and have a rear drain location. Compatibility is key; always measure first.

Clean the grid with a soft, damp cloth and mild detergent. Avoid using abrasive cleaners or scouring pads to prevent scratching the stainless steel.

Carefully measure your sink before ordering, referring to the provided video. If an incorrect size is ordered, consult the seller's return policy. It is highly recommended to contact the manufacturer if you are unsure about measurements prior to purchase.

Double-check your sink measurements against the product dimensions (26-3/8" X 14-7/16" with 3/8" corner radius). Ensure the drain location is compatible (rear drain). Contact the manufacturer for assistance if measurements were taken correctly but fit is still an issue.

Ensure the sink basin floor is level. The grid is designed to sit securely; if it wobbles, the sink may have an uneven bottom or the grid might be slightly misshapen. Contact customer support if the grid appears defective.

While made of 304 stainless steel, prolonged exposure to certain corrosive substances or hard water deposits can cause temporary discoloration. Clean with a mild detergent and soft cloth. Avoid leaving acidic or salty food residues on the grid for extended periods.