Paint Factory Colour It Spray Paint - Forest Green - 400ml

This spray paint is suitable for wood, metal, lacquer, and automotive surfaces.

Clean the surface thoroughly, remove any rust or loose paint, and lightly sand the surface to create a good surface for the paint to adhere to.

Apply thin, even coats, and allow each coat to dry before applying the next. The number of coats needed will depend on the surface and desired finish, but generally, two or three coats are recommended.

The paint has a quick-drying formula, typically drying to the touch in a matter of minutes. However, allow the paint to fully cure according to the manufacturer's instructions before use.

After each use, invert the can and spray until only propellant comes out to clear the nozzle.

Store the can in a cool, dry place away from direct sunlight and heat.

While suitable for some outdoor uses, it is primarily recommended for indoor surfaces.

This paint provides a smooth, high-gloss finish.

Ensure the can is shaken well and that you are spraying in thin, even coats. Adjust the distance from the surface and avoid spraying too much paint in one area.

Make sure the surface is clean, dry, and properly prepared (sanded if necessary). Consider using a primer.

Ensure that you are applying the paint in even coats and that you've allowed adequate drying time. The surface color can also affect the final color. Apply test on small area first.