Fuchs Titan SuperSyn F Eco-FE 0W30 Engine Oil - 5 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Fuchs Titan SuperSyn F Eco-FE 0W30 is a top-tier, fully synthetic engine oil designed for modern Ford diesel engines requiring extreme fuel economy performance. Its primary benefit is enhanced fuel efficiency and reduced oil consumption, while a potential caveat is its specific formulation that may not be suitable for all diesel engines. Key features include advanced synthetic technology, lower oil consumption, excellent cold start protection, and compliance with ACEA C2 and Ford WSS-M2C950-A specifications.
All features
| Model Part Number | 602017505 |
|---|---|
| Brand | Fuchs |
Extended Product Information
FAQs
Is this oil suitable for petrol engines?
No, this oil is specifically formulated for modern Ford diesel engines and may not be suitable for petrol engines or other diesel engine types not meeting the specified ACEA C2 and Ford WSS-M2C950-A standards.
What is the difference between this oil and a standard 5W-30 oil?
This 'Eco-FE' oil is a fully synthetic formulation designed for extreme fuel economy and lower oil consumption, adhering to specific OEM approvals like Ford WSS-M2C950-A. Standard 5W-30 oils may have different performance characteristics and may not meet these specific requirements.
How often should I change this engine oil?
Refer to your vehicle's owner's manual for the recommended oil change interval. Oils like the Titan SuperSyn F Eco-FE 0W30 are often designed to support extended drain intervals where permitted by the vehicle manufacturer.
Can I use this oil if my Ford diesel engine does not specify WSS-M2C950-A?
It is recommended to only use this oil if your vehicle manufacturer explicitly states it is required or approved (e.g., ACEA C2 and Ford WSS-M2C950-A). Using an oil not specified for your engine can void warranty and potentially cause damage.
What does 'Eco-FE' stand for?
'Eco-FE' typically indicates 'Economy - Fuel Efficiency', highlighting the oil's primary design objective to enhance fuel savings.
Where can I find the exact specification for my vehicle?
The most accurate place to find the required engine oil specification is your vehicle's owner's manual. You can also often find this information on a sticker under the hood or by contacting the vehicle manufacturer's customer service.
Troubleshooting
Engine oil warning light stays on after oil change.
Ensure the correct oil level is reached. Check if the oil level sensor needs recalibration by a mechanic. Verify that the engine has been run for a few minutes to circulate the oil before checking the level.
Noticeable increase in oil consumption.
Confirm this oil is the correct specification for your engine. While designed for lower consumption, excessive usage could indicate other engine issues like worn piston rings or valve seals, which require professional diagnosis.
Engine makes unusual noises during cold starts.
This oil is designed for excellent cold starts. If noises persist, ensure the correct oil grade is used and check for other potential mechanical issues unrelated to the oil itself.
Pros and Cons
Pros
- Significantly improves fuel economy.
- Reduces engine oil consumption.
- Provides superior protection during cold starts.
- Suitable for extended drain intervals.
- Meets critical OEM specifications for Ford and Jaguar Landrover.
Cons
- Specific formulation may not be compatible with older or non-Ford diesel engines.
- Requires careful selection based on vehicle manufacturer's service manual.
- Potentially higher cost compared to conventional oils.
Setup, Compatibility & Care
Compatibility: This engine oil is specifically designed for modern Ford diesel engines that require oil meeting the ACEA C2 and Ford WSS-M2C950-A specifications. It is also approved for Jaguar Landrover engines requiring STJLR.03.5007. Always consult your vehicle's owner's manual or a qualified mechanic to confirm the correct oil specification before use. Using an incorrect oil can lead to engine damage.
Setup (Oil Change):
- Ensure the engine is at operating temperature but not excessively hot.
- Safely lift and secure the vehicle.
- Locate and remove the drain plug, allowing the old oil to drain completely.
- Replace the drain plug with a new washer if recommended.
- Remove the old oil filter.
- Lubricate the rubber seal on the new oil filter with a small amount of new oil.
- Screw on the new oil filter hand-tight, plus an additional 3/4 turn (or as per filter manufacturer instructions).
- Refill the engine with the correct amount and grade of Fuchs Titan SuperSyn F Eco-FE 0W30, as specified in your vehicle's manual.
- Start the engine and let it run for a few minutes, checking for leaks.
- Turn off the engine, wait a few minutes, and check the oil level, topping up if necessary.
Care: Store the oil container in a cool, dry place away from direct sunlight. Keep the container tightly sealed to prevent contamination. Dispose of used oil responsibly at an authorized collection center.