Setup, Compatibility & Care
Compatibility: This oil is suitable for automotive gasoline and diesel vehicles where the manufacturer specifies an ACEA C2 0W-30 lubricant. It is also specifically approved for use in vehicles requiring Jaguar Land Rover engine oil specification STJLR.03.5007 0W-30. Always consult your vehicle's owner's manual to confirm the correct oil specification before use.
Setup (Oil Change):
- Ensure the engine is warm but not hot.
- Safely lift and support the vehicle.
- Locate and remove the oil drain plug.
- Allow the old oil to drain completely.
- Replace the drain plug with a new washer if necessary.
- Remove the oil filter.
- Lubricate the rubber seal on the new oil filter with a little fresh oil and install it hand-tight plus an additional 3/4 turn (or per filter manufacturer's instructions).
- Refill the engine with the correct amount of Castrol EDGE Professional E 0W-30, referring to your owner's manual for capacity.
- Start the engine and check for leaks. Allow it to run for a few minutes, then shut it off and check the oil level on the dipstick, topping up if necessary.
Care: Store the oil containers in a cool, dry place, away from direct sunlight. Ensure containers are sealed when not in use. Dispose of used oil responsibly at an authorized recycling center.