Best current price£126.00from eBay
Shopping.co.uk recommended and popular offers
eBay£126.00Visit shop 12 X U-Pol HIGH5 1K Ready For Use DARK GREY High Build Primer Paint 450ml UPOL
Visit shop2 offers from £126.00 - £127.49
View price history by clicking the chart icon.
The U-Pol HIGH5 1K High Build Primer is designed for automotive technicians and DIY enthusiasts who need a professional-grade surface preparation tool for spot and smart repairs. It delivers excellent filling capabilities and a smooth finish that mimics spray gun performance, though users should ensure they are working in a well-ventilated area due to the aerosol nature of the product.
| Colour | Grey |
|---|---|
| Model Part Number | HIGHDG/AL |
| Brand | U-Pol |
| Container Volume | 450ml |
No, this is a 1K ready-to-use primer that does not require the addition of a hardener.
Yes, but for optimal long-term corrosion protection on large bare metal areas, a dedicated etch or epoxy primer is recommended first.
The primer is fast-drying, typically ready for sanding in 30-60 minutes depending on ambient temperature and humidity.
Start with P320-P400 for initial smoothing and finish with P600-P800 before applying the topcoat.
It is compatible with most standard automotive basecoats and topcoats, but a test patch is always recommended.
Clear the nozzle by inverting the can and spraying until clear, or soak the nozzle tip in thinners.
Apply thinner coats and increase the distance between the can and the workpiece.
Ensure the substrate was properly cleaned, degreased, and sanded prior to application.
Before application, ensure the target surface is clean, dry, and free from grease, wax, or loose paint. Abrade the area with P180-P240 grit sandpaper for optimal mechanical keying. Shake the aerosol can vigorously for at least two minutes before use. Apply the primer in light, even coats, keeping the nozzle approximately 20-30cm from the surface. Allow sufficient flash-off time between coats. After use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging. Store in a cool, dry place away from direct sunlight.
