Shimano M06 Disc Brake Pads - XTR Deore XT

These M06 pads are designed for a wide range of Shimano disc brake calipers, including XTR, XT, LX, Deore, and SLX models. It is important to check your specific caliper model against the compatibility list provided in the product information or manual.

Metal brake pads generally offer higher stopping power and significantly greater durability, especially in wet, muddy, or sandy conditions. They also tend to perform more consistently across a wider temperature range.

Bedding-in ensures optimal performance. After installation, ride at a moderate speed and apply the brakes firmly several times, allowing them to cool between applications. Repeat this process to transfer pad material to the rotor, creating a smooth, consistent braking surface.

Yes, metal compound pads like the Shimano M06 are specifically designed to perform well in wet conditions, offering reliable stopping power when you need it most.

Basic bicycle tools are usually sufficient for installation, such as Allen keys for caliper removal and potentially a small pick or flathead screwdriver to gently remove the old pads and springs. Always refer to your specific brake system's manual for detailed instructions.

Replacement frequency depends on riding conditions, frequency, and braking style. Visually inspect your pads regularly. If the pad material is worn down to 1mm or less, or if you notice a significant decrease in braking performance, it's time for a replacement.

Mti technology refers to the use of titanium pad holders on certain Shimano brake pads. Titanium is lighter than traditional aluminum or steel and offers better heat insulation, which can help prevent brake fade during long descents.

Ensure the pads are properly bedded-in. Check for rotor contamination and clean if necessary. Inspect pads for excessive wear; replace if the friction material is very thin.

Noise can be normal for metal pads, especially when wet or dirty. Ensure the rotor is clean and free of debris. Check that the pads are seated correctly and that the caliper is aligned properly with the rotor. If noise persists in dry conditions, consider cleaning and re-bedding the pads.

This may indicate air in the brake lines. Bleeding the brake system might be necessary. Consult your bicycle's manual or a professional mechanic.

Frequent heavy braking or riding in extremely abrasive conditions (like heavy sand) can accelerate wear. Ensure your rotors are clean and not excessively worn, as this can damage pads faster. Check for proper alignment; misaligned calipers can cause uneven wear.