Connect Exhaust Clamps - 36mm (1 3/8") - 10 Piece Set - 30857

This clamp set is designed for exhaust pipes with an outer diameter of 36mm, which is equivalent to approximately 1 3/8 inches.

This is a 10-piece set, meaning you receive ten individual exhaust clamps.

Zinc plating provides a protective coating that enhances the clamp's resistance to rust and corrosion, extending its lifespan, especially in automotive exhaust applications.

These clamps are specifically sized for 36mm pipes. Using them on significantly different sizes may result in a poor or insecure fit and potential leaks. It is recommended to use the correct size clamp for your specific exhaust pipe diameter.

Typically, a wrench or socket set corresponding to the size of the clamp's bolt head will be required for installation.

Yes, exhaust clamps are designed for use in exhaust systems, which operate at high temperatures. The zinc plating offers durability under these conditions.

Ensure the clamp is the correct size for the exhaust pipe (36mm outer diameter). Check that the bolt threads are clean and not damaged. Try tightening the bolt further, but avoid over-tightening.

Verify the clamp is centered on the joint and tightened evenly. Ensure the exhaust pipe ends are clean and properly aligned. For persistent leaks, consider using exhaust sealant in conjunction with the clamp or check if a larger or different style of clamp is required.

While zinc plating offers protection, prolonged exposure to harsh conditions can still cause surface rust. Clean the clamp with a wire brush and apply a suitable metal protectant if necessary. Ensure the area is kept as dry as possible.