McLaren Ceramic Hydro Seal (500ml) + 2 Standard Micro Fiber Cloths

Ensure all surfaces are clean and completely free from any wax, polish, or sealant residues. A thorough wash and potentially a decontamination step (like clay barring if needed) will provide the best base for application.

No, for optimal performance and durability, it is recommended to apply McLaren Ceramic Hydro Seal to a bare, clean surface. Existing waxes or sealants should be removed first.

The product is designed to provide up to 6 months of durability with a single application, depending on environmental conditions and maintenance.

Yes, the product can be applied to all exterior surfaces, including plastic trim and rubber seals, providing them with protection and enhancing their appearance.

Use a clean, dry microfiber cloth. Buff the surface in a circular or back-and-forth motion until all residue is removed and a high gloss is achieved. Using a second clean microfiber cloth can help ensure a perfect finish.

Yes, the McLaren Microfiber cloths are durable and machine washable. It's recommended to wash them separately to maintain their cleaning effectiveness.

It is generally recommended to avoid applying in direct sunlight or on hot surfaces. Work in a shaded area or during cooler parts of the day to ensure even application and prevent premature drying.

This can occur if the product was not spread evenly or if the surface was not properly prepared. Ensure the surface is free of contaminants and apply the product in thin, even coats. Allow the recommended dwell time before buffing with a clean microfiber cloth. Buffing in a circular motion can help spread the product evenly.

Verify that all previous wax or sealant residues have been completely removed from the surface. Proper surface preparation is key to the hydrophobic performance. Reapply following the preparation steps carefully.

Environmental factors such as harsh weather, frequent washing with aggressive chemicals, or exposure to heavy contaminants can reduce the lifespan. Consider more frequent washing with pH-neutral shampoos and avoid abrasive cleaning methods to extend durability.

Ensure you are using a quality microfiber towel or soft sponge. For larger areas, you may need to work in smaller sections. Spraying the product directly onto the applicator tool can sometimes help with even distribution.