Best current price£19.11from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.11Visit shop B&Q - Uviwax Non Yellowing Uv ProtectionClearSatin125Ml
Visit shop3 offers from £19.11 - £103.88
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking to protect wooden surfaces from UV damage and discoloration. The key benefit is its non-yellowing, UV-resistant formula that maintains the natural appearance of wood while offering robust protection. A potential caveat is its specific application for interior use, primarily on furniture and interior wood applications. Osmo Uviwax is a high-performance oil finish designed to shield wood from the sun's harmful UV rays, preventing fading and graying. Its microporous, breathable finish ensures it won't crack, peel, or flake, and it is also water, dirt, saliva, and sweat-resistant, making it suitable for children's toys. Spot repairs and future applications do not require sanding.
| Model Part Number | 7266 |
|---|---|
| Brand | Osmo |
No, Osmo Uviwax is specifically designed and recommended for interior wood applications only. For exterior protection, please refer to Osmo's exterior finishing products.
Clean spills promptly with a damp cloth. For regular cleaning, use a soft cloth with mild soap and water. Avoid harsh chemicals or abrasive cleaners.
It is best applied to bare, clean wood. If applying over an existing finish, ensure it is compatible and properly prepared (cleaned and degreased). Always test on a small, inconspicuous area first.
Drying times can vary depending on temperature, humidity, and ventilation. Generally, it takes 12-24 hours for a coat to be dry to the touch and ready for a second coat or light use.
The 'White (Transparent)' version contains a subtle white pigment that provides a slight lightening effect while remaining transparent enough to show the wood grain. A clear version would offer protection without any added colorant.
No, sanding between coats is not necessary for Osmo Uviwax. It is a microporous finish that does not require it. Sanding is also not required for spot repairs.
While it is saliva-resistant and suitable for children's toys, it is not specifically rated or recommended for direct food contact surfaces like cutting boards. For food-safe finishes, consult Osmo's range of food-safe oils.
Ensure the product was applied thinly and evenly. Avoid overworking the product. If the finish is still wet, you may be able to gently smooth out marks. For dried marks, light sanding may be necessary, followed by a reapplication.
Check if the application was too thick. Ensure adequate ventilation in the application area. Extreme humidity or low temperatures can slow drying times. Try to improve air circulation and maintain a consistent room temperature.
This product has a white transparent tint. For a clearer finish, consider Osmo Uviwax Clear variants. Ensure the product was applied thinly as intended.
Ensure the repair area is clean and the new coat is applied thinly and feathered out towards the existing finish. Applying a maintenance coat over the entire surface might help unify the appearance.
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, or old finishes. For untreated wood, a light sanding may be beneficial for optimal adhesion. Ensure adequate ventilation during application.
Application: Apply a thin, even coat using a brush or roller suitable for oil-based finishes. Work in the direction of the wood grain. Allow the first coat to dry thoroughly according to the manufacturer's instructions (typically 12-24 hours).
Second Coat: Apply a second thin coat. For spot repairs or future maintenance, no sanding is required; simply clean the area and apply a thin coat of Uviwax.
Compatibility: Osmo Uviwax is designed for interior wood applications. It is compatible with most wood types. Always test on an inconspicuous area first, especially if applying over existing finishes.
Care: Clean spills immediately with a damp cloth. For general cleaning, use a mild detergent and water. Avoid abrasive cleaners. Reapply a thin maintenance coat as needed to maintain protection, typically only in areas with significant wear or sun exposure.
