Shopping.co.uk

Microwave Sensor - ENER-J

Microwave Sensor - ENER-J

Upgrade your ENER‑J T561 LED Bulkhead effortlessly—no rewiring needed. This plug‑and‑play microwav...

Best current price£20.50from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £20.50

View price history by clicking the chart icon.

B&QB&Q - Easy To Connect Micromave Sensor For T561
Free delivery in 1–3 days
£20.50
Visit shop
RackhamsEner-J Plug And Play Microwave Sensor For Cct Led Bulkhead (Sku: T561)
Free delivery in 1–3 days
£20.50
Visit shop

Product Information

Full details

The ENER-J T563 Microwave Sensor is designed for users looking to easily upgrade their ENER-J T561 LED Bulkhead with automatic lighting control. Its key benefit is adding motion and daylight sensitivity without any rewiring, leading to energy savings and enhanced convenience. A potential caveat is its specific compatibility primarily with the T561 bulkhead for plug-and-play functionality. This sensor features adjustable settings for hold time, detection area, and daylight sensitivity, all controlled via DIP switches, making it suitable for common indoor areas like lobbies, corridors, and utility rooms.

All features

Model Part NumberT563
BrandENER-J

Extended Product Information

FAQs

Is the ENER-J T563 sensor compatible with any LED bulkhead?

The ENER-J T563 is specifically designed as a plug-and-play upgrade for the ENER-J T561 LED Bulkhead. While it operates on universal voltage, integrating it with other brands or models may require professional electrical assessment and is not guaranteed.

How do I adjust the detection area?

The detection area is adjusted using the DIP switches located on the sensor. You can typically select coverage levels such as 25%, 50%, 75%, or 100% by setting the relevant switches.

What is the purpose of the daylight sensor?

The built-in daylight sensor allows the lighting to be controlled based on ambient light levels. You can configure a Lux threshold, so the light will only turn on if motion is detected AND the ambient light is below the set threshold, saving energy during daylight hours.

What is the maximum range the sensor can detect motion?

The sensor has a detection radius of up to 3.5m at 0.3 m/s (walking speed) when mounted at a height of 3m. The detection angle is 150°.

How much power does the sensor consume when idle?

The ENER-J T563 features ultra-low power standby, consuming less than 0.2 W when idle.

Can I set the light to stay on for a specific duration?

Yes, the hold time is adjustable via DIP switches, offering settings such as 5 seconds, 1 minute, 3 minutes, or 10 minutes. This determines how long the light remains on after no motion is detected.

What is the recommended mounting height for optimal performance?

The standard recommended mounting height is 3 meters, with a maximum recommended height of 5 meters.

Troubleshooting

Light does not turn on when motion is detected.

Check if the daylight sensor is enabled and set to a threshold that is currently met. Adjust the Lux setting or disable the daylight sensor. Ensure the sensor is properly connected and the power to the fixture is on.

Light stays on continuously.

Verify that the hold time is set correctly. If set to a very long duration, it may appear continuous. Check for any persistent motion within the detection zone. Ensure the sensor is not obstructed.

Light turns off too quickly.

Adjust the hold time setting to a longer duration. Ensure that the motion detection zone is correctly configured to cover the intended area.

Sensor is not detecting motion in a specific area.

Check the detection area settings (25%, 50%, 75%, 100%) and increase if necessary. Ensure the mounting height is within the recommended range (max 5m) and the sensor lens is clean.

Inconsistent performance.

Ensure the sensor is not affected by external factors like rapid temperature changes or vibrations. Clean the sensor lens and verify all DIP switch settings are correctly applied.

Pros and Cons

Pros

  • Easy installation with no rewiring required for compatible fixtures.
  • Significant energy savings through automatic lighting control.
  • Highly customizable settings to suit various environments and user preferences.
  • Low standby power consumption for continuous efficiency.
  • Broad voltage compatibility makes it versatile.
  • Durable design suitable for a wide range of operating temperatures.

Cons

  • Primarily designed for the ENER-J T561 LED Bulkhead; integration with other fixtures may require professional assessment.
  • DIP switch adjustments might be challenging in cramped installations.
  • The detection radius is specified for specific speeds, actual performance may vary.
  • Requires a clear line of sight for optimal motion detection.
  • Daylight sensor requires careful calibration to avoid unnecessary light activation.

Setup, Compatibility & Care

Setup:

  1. Ensure the ENER-J T561 LED Bulkhead is powered off.
  2. Remove the existing cover or driver housing as per the T561 bulkhead's instructions.
  3. Connect the ENER-J T563 microwave sensor to the designated connector within the T561 bulkhead. It's a plug-and-play connection, requiring no new wiring.
  4. Configure the DIP switches according to your desired settings for hold time, detection area, and daylight sensitivity.
  5. Reassemble the T561 bulkhead.
  6. Restore power and test the sensor.

Compatibility:

  • Primary Compatibility: ENER-J T561 LED Bulkhead.
  • Voltage: Operates on 230V AC and is compatible with 110–240 VAC input.

Care:

  • Keep the sensor lens clean for optimal detection. Use a soft, dry cloth for cleaning. Avoid abrasive materials or solvents.
  • Ensure the mounting height remains within the recommended range (standard 3m, max 5m) for accurate performance.
  • Periodically check and readjust DIP switch settings if environmental conditions or usage patterns change.

Price History

DatePrice
Visit shop