POLYMAKER Panchroma 3D Printing Filament - Lotus Pink - 1kg
Best current price£18.00from Currys
Best offers
Shopping.co.uk recommended and popular offers
Currys£18.00Visit shop Polymaker Panchroma 3D Printing Filament - Matte Lotus Pink
Visit shopCurrys£18.00Visit shop One Offer
1 offer from £18.00
View price history by clicking the chart icon.
Product Information
Full details
POLYMAKER Panchroma (formerly PolyTerra PLA) is an ideal 3D printing filament for makers who prioritize aesthetic matte finishes and ease of use, suitable for everything from rapid prototyping to artistic models. It offers exceptional layer bonding and compatibility with diverse printer setups, though users should be mindful of its specific temperature requirements to maintain its unique matte texture. As a bioplastic-based material, it balances reliable performance with a sustainable design on a cardboard spool.
All features
| Model Part Number | 615674 |
|---|---|
| Brand | POLYMAKER |
Extended Product Information
FAQs
Is Panchroma the same as the old PolyTerra PLA?
Yes, Panchroma is the new name for the material previously known as PolyTerra PLA by Polymaker.
What is the best print speed for this filament?
It is designed to handle speeds up to 300 mm/s, though 50-100 mm/s is recommended for the highest surface detail.
Do I need a hardened steel nozzle?
No, a standard brass nozzle is sufficient as the material is not abrasive.
How should I store the spool?
Store in a cool, dry place inside an airtight container with desiccant to prevent moisture absorption.
Can I use this for functional parts?
Yes, its superior layer bonding makes it suitable for functional prototypes and non-load-bearing parts.
Troubleshooting
Poor bed adhesion
Clean the print surface with isopropyl alcohol and increase the bed temperature within the 25°C to 60°C range.
Stringing during prints
Increase retraction speed or distance slightly and ensure your extrusion temperature is not excessively high.
Under-extrusion at high speeds
Increase the printing temperature by 5-10°C to ensure the filament melts fast enough for high-speed extrusion.
Pros and Cons
Pros
- Striking matte finish reduces the visibility of layer lines
- Highly reliable adhesion and structural integrity
- Compatible with high-speed 3D printing workflows
- Sustainable cardboard spool packaging
- Consistent diameter for clog-free extrusion
Cons
- Matte finish sensitivity to extreme temperature fluctuations
- May require bed temperature fine-tuning for specific build plates
- Limited color range compared to standard gloss filaments
Setup, Compatibility & Care
To achieve the best results, calibrate your first layer height carefully, as the material's matte nature can sometimes obscure small gaps if the nozzle is set too far from the bed. Use a nozzle temperature of 190°C to 230°C depending on your extrusion speed; faster speeds typically require higher temperatures to maintain flow. The heated bed should be set between 25°C and 60°C. For long-term storage, keep the filament in a dry, cool environment, ideally in a sealed bag with desiccant packets, as PLA materials can absorb atmospheric moisture over time, potentially leading to stringing or surface blemishes.