WD Red SA500 - 500GB SATA SSD







Best current price£332.79from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£332.79Visit shop Western Digital Red SA500 M.2 1 TB Serial ATA III 3D NAND
Visit shop






Best current price£332.79from eBay
Shopping.co.uk recommended and popular offers
eBay£332.79Visit shop Western Digital Red SA500 M.2 1 TB Serial ATA III 3D NAND
Visit shop25 offers from £332.79 - £1,195.32
View price history by clicking the chart icon.
1 offer from £329.00
View price history by clicking the chart icon.
1 offer from £124.95
View price history by clicking the chart icon.
This WD Red SA500 500GB SATA SSD is designed for users looking to boost the performance and responsiveness of their Network Attached Storage (NAS) systems. Its key benefit is providing reliable, 24/7 operation optimized for NAS environments, especially for caching frequently accessed files. A potential caveat is that it uses the SATA interface, which is not as fast as NVMe for certain applications.
| Series | Red |
|---|---|
| Model Part Number | WDS500G1R0A-68A4W0 |
| Brand | Western Digital |
While it is compatible with Windows operating systems and can function as a boot drive, the WD Red SA500 is specifically optimized for NAS environments and 24/7 operation. For maximum performance in a PC, other SSDs might be better suited.
The WD Red SA500 500GB SSD has a TBW rating of 350 TBW.
Yes, significantly. SSDs offer much faster read/write speeds and lower latency compared to HDDs, especially noticeable for caching and frequently accessed files.
Yes, the WD Red SA500 supports both S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) and TRIM commands for drive health monitoring and performance optimization.
The MTBF for the WD Red SA500 SSD is 1,750,000 hours.
Yes, this is a common and recommended configuration. The SSD can be used for caching to speed up access to frequently used data, while HDDs provide bulk storage.
Western Digital typically offers a 5-year limited warranty on WD Red SSDs. Please refer to Western Digital's official warranty policy for exact terms.
Ensure the SATA data and power cables are securely connected. Try a different SATA port and cable if available. Verify that your NAS firmware is up-to-date.
Confirm the drive is set up as a cache or primary storage as intended. Check NAS system logs for any disk errors. Ensure no other background processes are heavily utilizing the NAS resources.
Run a diagnostic check on the drive using the NAS manufacturer's tools. Ensure the drive is not overheating; check NAS fan operation and enclosure ventilation.
This is normal due to formatting and system overhead. Ensure the NAS is not reporting a different capacity due to RAID configuration or other limitations.
Setup: Install the WD Red SA500 SSD into an available 2.5" drive bay within your NAS enclosure. Connect it using a standard SATA data and power cable. Consult your NAS device's manual for specific installation instructions.
Compatibility: This SSD is designed for NAS systems and is compatible with most NAS devices supporting 2.5" SATA drives. It also supports Windows operating systems. Check your NAS manufacturer's compatibility list for confirmed support.
Care: WD Red SSDs are designed for continuous operation. Ensure adequate ventilation within your NAS enclosure to maintain optimal operating temperatures (0°C to 70°C). Avoid exposing the drive to extreme temperatures outside its operating range (-55°C to 85°C storage). Regular firmware updates for your NAS can also ensure optimal drive performance and compatibility.