Setup, Compatibility & Care
Before beginning installation, ensure the gas supply to the appliance is turned off at the isolation valve. Access the burner area by removing the hob caps and pan supports.
- Compatibility Check: Confirm your model number matches the supported list (e.g., AG56DB, AG66TB).
- Installation: Carefully route the 1500mm cable to ensure it does not touch sharp edges or come into direct contact with the hottest parts of the burner flame that could melt the casing.
- Tightening: Ensure the E-type connector is securely tightened to the safety valve assembly to avoid intermittent connections.
- Testing: After installation, perform a leak test and confirm the flame stays lit consistently when the control knob is released.