Best current price£11.19from eBay
Shopping.co.uk recommended and popular offers
eBay£11.19Visit shop Autotek Vauxhall Astro Silver Fast Drying Aerosol Spray Paint 300ml
Visit shop4 offers from £11.19 - £12.99
View price history by clicking the chart icon.
The Autotek Vauxhall Astro Silver Aerosol Spray Paint is an ideal solution for DIY automotive enthusiasts looking to perform touch-ups or small repairs on Vauxhall vehicles. This fast-drying acrylic formula offers professional-grade precision colour matching and durability against environmental exposure. While it provides a high-quality finish, users must invest time in proper surface preparation and masking to achieve a seamless, professional result.
| Colour | Silver |
|---|---|
| Model Part Number | ATOMC353300 |
| Brand | Autotek |
| Container Volume | 300ml |
It is strongly recommended to use a primer coat first to ensure proper adhesion and long-term rust protection.
Allow the paint to touch-dry between coats, which usually takes 10-15 minutes depending on ambient temperature.
While the paint is durable, applying a high-quality clear coat over the final colour coat will provide added depth and protection.
Yes, this paint is compatible with rigid plastic surfaces, though a plastic primer is advised for better performance.
For the best results, use the product in a dry, well-ventilated area at an ambient temperature between 15°C and 25°C.
Use a specialized automotive paint remover or solvent while the paint is still wet; cured paint will require mechanical sanding.
The paint was likely applied too thickly or too close to the surface. Apply thinner coats from a greater distance.
Soak the nozzle in warm water or replace it; always clear the valve after each use to prevent this.
This is often caused by spraying in high temperatures or incorrect distance. Ensure you are spraying from the recommended 15-25cm.
Before starting your project, ensure the target surface is thoroughly cleaned to remove wax, grease, and dust, as contaminants will prevent the paint from bonding properly. It is highly recommended to apply at least two coats of a compatible primer to ensure adhesion. Shake the aerosol can vigorously for at least two minutes before use to mix the pigments. After finishing, turn the can upside down and press the nozzle for a few seconds to clear the valve, preventing the spray mechanism from clogging for future use.
