Tech Cote Chain & Engine Cleaner - 400ml - TC160

Yes, it is formulated for use on chains, sprockets, engines, and frames of all motorcycles. However, always test on an inconspicuous area if you have concerns about specific finishes.

Refer to the specific instructions on the aerosol can, as dwell times can vary. Generally, allow it to work for a few minutes to break down grime before rinsing.

While formulated for motorcycles, it can likely be used on bicycle drivetrains. However, ensure thorough rinsing and re-lubrication, and test on a small area first.

It means the cleaner can be mixed or dissolved with water, allowing for easy removal and cleanup using water alone.

The number of applications depends on how frequently and extensively you use the product. It is designed for targeted application on specific parts.

It is ideal for use in motorsport, karting, performance motorcycle, MX/Off Road, and general workshop settings where tough grease and oil removal is needed.

Ensure the can was shaken well before use. Apply a second coat or allow the first coat to dwell for a slightly longer period before rinsing. Make sure the spray nozzle is not blocked.

Rinse the area thoroughly with a strong stream of water. Ensure all product has been flushed away. Consider using a brush to agitate stubborn spots before the final rinse.

Check if the nozzle is clogged. Try cleaning the nozzle with a small pin or wire. Ensure the can is held in the correct upright position during spraying.