Shopping.co.uk

Trend Pierce And Trim Cutter Laminate Cutting Router Bit - 47/4X1/4TC

Trend Pierce And Trim Cutter Laminate Cutting Router Bit - 47/4X1/4TC

Combination pierce and trim cutters. These cutters pierce and cut out apertures in laminate workto...

Best current price£14.41from eBay

Best offers

Shopping.co.uk recommended and popular offers

All Offers

71 offers from £14.41 - £118.36

View price history by clicking the chart icon.

eBayTREND PRO 47/4X1/4TC 47/4 6.3MM GUIDED PIERCE & TRIM ROUTER 1/4"" SHANK
Free delivery in 1–3 days
£14.41
Visit shop
OnBuy.comTrend 47/4X1/4Tc 47/4 X 1/4 Tct Pierce & Trim Cutter 6.3 X 18Mm
Free delivery in 1–3 days
£19.27
Visit shop
Power Tools DirectTrend Guided Profiler 9.5Mm Dia X 6Mm Cut Pk 1 46/900X1/4Tc
£6.95 delivery
£28.20
Visit shop
Rapid Online - Rapid Electronics Ltd.Trend 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm
Free delivery in 1–3 days
£32.40
Visit shop
Tooled UpTrend Bearing Guided Template Profiler Router Cutter 9.5mm 6.35mm 1/4"
£5.95 delivery
£33.95
Visit shop

Product Information

Full details

This guide is for woodworkers and DIY enthusiasts who need to make precise cuts in laminate worktops using the Trend 47/4X1/4TC cutter. The primary benefit is the ability to create clean, accurate apertures. However, it's essential to use the cutter correctly to avoid chipping or damaging the material.

All features

Model Part Number47/4X1/4TC
BrandTrend

Extended Product Information

FAQs

What is the cutting diameter of the Trend 47/4X1/4TC cutter?

The cutting diameter is 18 mm.

What is the shank diameter?

The shank diameter is 1/4 inch.

What materials is this cutter designed for?

This cutter is designed for use with laminate worktops.

How do I install the cutter?

Insert the 1/4 inch shank into your router's collet and tighten securely.

How do I clean the cutter?

Clean the cutter after each use using a suitable tool cleaner and brush to remove resin and debris.

Where can I find replacement cutters?

Replacement cutters can be found from Trend retailers, and online.

What type of router is compatible with this cutter?

Routers that accept 1/4 inch shank bits are compatible.

Troubleshooting

Cutter is not cutting cleanly.

Check the sharpness of the cutter. Replace if necessary. Ensure the router speed is appropriate for the material and that you are feeding the router at a consistent rate.

Chipping or damage to the laminate.

Use a slower feed rate. Ensure the cutter is sharp and the worktop is securely clamped.

Cutter vibrates excessively.

Ensure the cutter is properly installed and tightened in the router collet. Check for any damage to the cutter.

Pros and Cons

Pros

  • Creates clean and accurate apertures in laminate worktops.
  • The guide follower base ensures precise cuts.
  • Efficient material removal due to the single fluted design.
  • Easy to use with compatible routers.
  • Durable and reliable for professional and DIY use.

Cons

  • Requires proper technique to prevent chipping or damage.
  • May not be suitable for very thick laminate materials.
  • Limited cutting diameter may not suit all applications.
  • Requires a router with a 1/4 inch collet.

Setup, Compatibility & Care

  • Setup:
  1. Ensure the router is unplugged.
  2. Insert the 1/4 inch shank of the cutter into the router collet.
  3. Tighten the collet securely, following the router's instructions.
  4. Set the cutting depth as needed for your application.
  • Compatibility:
  • Compatible with routers that accept 1/4 inch shank bits.
  • Suitable for use with laminate worktops.
  • Care:
  • Clean the cutter after each use to remove resin and debris.
  • Use a suitable tool cleaner and brush.
  • Store the cutter in a clean, dry place to prevent corrosion.

Price History

DatePrice
Visit shop