Best current price£39.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£39.99Visit shop B&Q - Indian Sandstone Sealer 5LPatioDriveway & Path Sealant. Waterproof & Weatherproof Up To 10 Years. Covers Up To 50M²
Visit shop1 offer from £39.99
View price history by clicking the chart icon.
The SIRAMICO COATINGS Indian Sandstone Sealer is designed for homeowners and professionals looking to protect and enhance their outdoor paved areas like patios, driveways, and paths. Its key benefit is providing long-lasting, weatherproof protection against common stains and environmental damage, maintaining a natural look. A slight caveat is that successful application requires surfaces to be clean and dry beforehand for optimal adhesion. This advanced, high-performance sealer forms a durable barrier against dirt, grime, oil, BBQ spills, moss, and algae, keeping surfaces looking cleaner for longer with a simple one-coat application.
| Model Part Number | SIRAM-WWPS-01 |
|---|---|
| Brand | SIRAMICO COATINGS |
The SIRAMICO COATINGS Indian Sandstone Sealer provides long-lasting protection for up to 10 years.
No, the surface must be completely dry before application for the sealer to bond effectively and perform optimally. The sealer itself is rainfast in 3 hours once applied.
A 5L container provides coverage of up to 50 square metres.
The sealer dries to a natural matt finish, preserving the original look of the stone without adding gloss or shine.
A single, even coat is typically sufficient. Avoid applying multiple thick coats.
It is suitable for Indian sandstone, natural stone, concrete, block paving, brick, tarmac, and slate.
Regular sweeping and occasional cleaning with water and a mild detergent are usually sufficient. Avoid harsh chemical cleaners.
Ensure the sealer was applied evenly in a single coat. Avoid over-working the product. For future applications, maintain a wet edge and work systematically.
The surface may not have been adequately prepared (e.g., still damp, dirty) or the sealer may not have fully cured. Ensure proper drying time before expecting full performance. Reapplication may be necessary if contamination occurred during application.
This can occur if applied too thickly, in cold/damp conditions, or if the surface was not completely dry. Try cleaning with a specific sealer cleaner or, in some cases, a light pressure wash may help. Reapplication may be needed.
Ensure the surface was thoroughly cleaned and free of existing growth before sealing. Heavy contamination or application on a very damp surface can lead to this. Treat affected areas and consider re-sealing after thorough drying.
Preparation:
Ensure the surface to be treated is clean, dry, and free from any loose debris, moss, or algae. A deep clean may be required before application. Allow the surface to dry completely; this may take 24-48 hours depending on weather conditions.
Application:
Compatibility:
This sealer is suitable for a wide range of porous surfaces including:
Care:
Once cured, the sealed surface requires minimal care. Regular sweeping to remove loose debris is recommended. Light cleaning can be done with water and a mild detergent if necessary. Avoid harsh chemical cleaners which may degrade the seal over time.
Drying & Curing:
The surface will be rainfast in approximately 3 hours. Full cure is achieved within 24 hours, after which the surface can be subjected to normal use.
