HydroSure Bush Adaptor - Black - Pack of 5

This HydroSure Bush Adaptor connects a 1" BSP male thread to a 3/4" BSP female thread.

The adaptor is designed for typical irrigation systems. For very high-pressure applications, ensure it meets system requirements or consult with a plumbing professional.

It is designed for BSP threaded components. Compatibility depends on the specific threads of the pipes or fittings you are connecting.

No, the HydroSure Bush Adaptor is designed for simple, tool-free installation. Hand-tightening is usually sufficient.

Each pack contains 5 HydroSure Bush Adaptors.

The adaptor is made from a durable material designed for long-term outdoor performance.

This adaptor is specifically designed and recommended for water irrigation systems and is not intended for gas applications.

Ensure the threads are clean and properly aligned. Tighten the connection further by hand. Check for any debris or damage on the threads of the components being connected. If the leak persists, consider using PTFE tape on the male thread (if appropriate for the connected component) before tightening.

Verify that you are attempting to connect a 1" BSP male thread to the adaptor and a 3/4" BSP female thread to the other side. Ensure there is no cross-threading by starting the connection gently. Clean both threads to remove any obstructions.

This is uncommon with normal use. Ensure you are not over-tightening connections, which can stress the material. Verify the adaptor is suitable for the intended pressure and application. Replace if damage is observed.