Salice Series 200 Pie Cut Corner Overlay Hinge - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for cabinet makers and DIY enthusiasts seeking reliable, self-closing hinges for pie cut corner cabinets. The Salice Series 200 offers a 70-degree opening angle and a secure screw-on installation, ensuring doors close smoothly. A potential caveat is the specific 35mm cup diameter, which requires precise drilling.
All features
| Colour | Silver |
|---|---|
| Model Part Number | C2PYA99 |
| Brand | Rok |
Extended Product Information
FAQs
What is a 'pie cut' corner hinge?
A pie cut corner hinge is specifically designed for cabinet doors that meet at an angle, typically in a corner, forming a 'pie slice' shape when viewed from above.
What does 'overlay' mean in relation to this hinge?
Overlay refers to how the cabinet door sits in front of the cabinet frame. This hinge is designed for doors that cover the cabinet opening partially or fully.
Does this hinge come with installation screws?
Yes, installation screws are included with the Salice Series 200 Pie Cut Corner Overlay Hinge.
What is the maximum angle the door can open?
This hinge provides a 70-degree opening angle.
What is the required drill diameter for the door cup?
The required drill diameter for the door cup is 35mm, with a cup depth of 11mm.
Can this hinge be used for standard 90-degree corner cabinets?
No, this hinge is specifically designed for pie cut (angled) corner cabinets, not standard 90-degree corners.
How do I adjust the door alignment?
The hinge typically has adjustment screws that allow you to modify the door's position horizontally, vertically, and in depth for a perfect fit.
Troubleshooting
Hinge does not self-close.
Ensure the door is properly aligned and that there is no obstruction preventing the door from closing. Check if the spring mechanism is engaged.
Door is not level or aligned properly.
Use the adjustment screws on the hinge to fine-tune the door's position vertically, horizontally, and in depth. Refer to hinge adjustment guides if needed.
Screws do not tighten properly.
Ensure you are using the correct size screws and that the pre-drilled holes in the cabinet and door are not stripped. If stripped, consider using wood filler or anchors.
Hinge makes noise during operation.
Clean any debris from the hinge mechanism and apply a small amount of silicone-based lubricant.
Pros and Cons
Pros
- High-quality construction from a reputable brand (Salice).
- Self-closing feature adds convenience and a finished look.
- Designed for a specific cabinet application (pie cut corners).
- Durable nickel finish resists corrosion.
- Includes necessary installation screws.
Cons
- Limited to a 70-degree opening, which may not suit all needs.
- Requires precise drilling for the 35mm cup diameter.
- Overlay application might require specific cabinet construction.
- Primarily designed for wooden doors.
Setup, Compatibility & Care
Setup:
- Ensure your cabinet door has the correct pre-drilled holes for a 35mm cup diameter and 11mm cup depth.
- Position the hinge in the door cup and secure it using the provided screws.
- Attach the hinge plate to the cabinet frame according to your overlay requirements.
- Adjustments can typically be made via screws on the hinge body for alignment.
Compatibility:
- This hinge is designed for overlay applications on pie cut corner cabinets.
- Requires doors with a bore diameter of 35mm and a cup depth of 11mm.
- The maximum drilling distance on the door for the hinge cup is between 3mm and 6mm.
- Suitable for wooden cabinet doors.
Care:
- Clean with a soft, damp cloth. Avoid abrasive cleaners or solvents, as they can damage the nickel finish.
- Periodically check that all screws remain tight.
- Lubricate the hinge mechanism if you notice any stiffness (use a silicone-based lubricant).