Rust-Oleum Kitchen Tile Paint - White

Clean the tiles thoroughly, degreasing them if necessary. Lightly sand the surface to create a key. Rinse and allow to dry completely.

While the paint is water-resistant, it is better suited for areas with less direct water exposure, such as kitchen backsplashes and walls. For showers, consider a paint specifically designed for high-moisture environments.

Typically, two coats are recommended for full coverage and the best finish. However, the exact number may vary depending on the tile color and condition.

The paint dries quickly, often within a few hours. However, allow sufficient time for each coat to dry before applying the next one.

Use a damp cloth and mild detergent. Avoid abrasive cleaners or scrubbing pads that could damage the paint finish.

The product is available in White.

Ensure the surface is properly cleaned and degreased before application. Lightly sand the tiles to provide a key for the paint to adhere. Apply a thin coat to start.

Apply the paint in thin, even coats and avoid over application. Use a high-quality brush or roller. Ensure the environment is not too humid.

This may indicate insufficient surface preparation or an incompatible surface. Ensure the tiles are suitable for painting and that the surface is properly prepared.