Manrose Intervent Extractor Fan - Low Voltage Fan With Timer Transformer

The adjustable electronic timer allows the fan to continue running for a set period (1-20 minutes) after the switch that activated it has been turned off, ensuring complete ventilation of steam or odors.

The fan has an extraction rate of 85m³hr. For optimal performance in larger bathrooms, ensure that appropriate ducting is installed and consider its placement within the room.

While mounting and basic connection can be straightforward, the low voltage (12v) wiring requires connection to a transformer and mains power, which should ideally be performed by a qualified electrician for safety.

Gently wipe the exterior grille and casing with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners. Ensure the power is off before cleaning.

The fan operates at a noise level of 41 dB(A), which is considered relatively quiet for an extractor fan.

> Info needed: Confirmation if the transformer is included with the fan unit or needs to be purchased separately.

Check that the power supply is connected to the transformer and the transformer is correctly wired to the fan. Ensure the circuit breaker is on. Verify the fan switch is activated.

The timer setting may be incorrectly configured or the connection to the control switch might be faulty. Reset the timer and check wiring. If connected to a light switch, ensure the light is off.

Check for any obstructions in the fan impeller or ducting. Ensure the fan is securely mounted. The motor has pre-oiled bearings, so lubrication is typically not required.

Ensure ducting is not kinked or blocked. Clean the fan grille and impeller. Check if the external vent is obstructed.