Best current price£41.69from eBay
Shopping.co.uk recommended and popular offers
eBay£41.69Visit shop Hobbywing Quicrun WP 1080 G2 Brushed ESC HW30120202
Visit shop4 offers from £41.69 - £51.95
View price history by clicking the chart icon.
The Hobbywing QUICRUN WP 1080 G2 Brushed ESC is designed for RC rock crawler enthusiasts seeking a reliable and feature-rich electronic speed controller. Its key benefit is the "first real car mode" for brushed motors, offering more intuitive control, though its primarily brushed motor focus might be a limitation for those transitioning to brushless systems.
| Model Part Number | 30120202 |
|---|---|
| Brand | Hobbywing |
This ESC is specifically designed for brushed DC motors.
Yes, the QUICRUN WP 1080 G2 is waterproof and dust-resistant, making it suitable for all-weather operation.
It's a feature that provides a more realistic throttle response, allowing for finer control that mimics the feel of a full-scale vehicle.
The BEC (Battery Eliminator Circuit) offers selectable output voltages of 6V, 7.4V, and 8.4V.
The maximum continuous current rating is 80 Amps.
It is compatible with both LiPo and NiMH battery types. Please refer to the manual for specific cell count limitations.
Settings can typically be adjusted using a separate programming card (sold separately) or via specific button sequences and throttle commands as detailed in the product manual.
Verify battery connection is secure and the battery is charged. Check that the ESC is properly connected to the motor and receiver. Ensure the switch (if applicable) is in the 'ON' position.
Reverse the motor wires connected to the ESC. Alternatively, use the ESC's programming function to reverse motor direction if available.
Perform throttle calibration as per the ESC manual. Check receiver and transmitter connections. Ensure the ESC is not overheating.
Check motor for binding or excessive load. Ensure the ESC's current rating is appropriate for the motor and battery. Verify fan (if equipped) is operational. Reduce gear ratio if necessary.
Confirm BEC output voltage is correctly set and compatible with your receiver/servos. Check BEC wire connection to the receiver. Ensure the battery voltage is sufficient.
Setup:
Compatibility:
Care:
