SRAM Red eTAP Blip Clamp Remote Shifter Mounts - 31.8mm
Best current price£15.00from Leisure Lakes Bikes
Best offers
Shopping.co.uk recommended and popular offers
Leisure Lakes Bikes£15.00Visit shop Sram Red e-Tap Blip Clamp 31.8mm Pair
Visit shopLeisure Lakes Bikes£15.00Visit shop All Offers
2 offers from £15.00
View price history by clicking the chart icon.
Leisure Lakes BikesSram Red e-Tap Blip Clamp 31.8mm Pair
Free delivery in 1–3 days
£15.00
Visit shop
Sram Red e-Tap Blip Clamp 31.8mm PairFree delivery in 1–3 days£15.00Visit shop →
Product Information
Full details
This guide is for cyclists using SRAM RED eTap groupsets who want to optimize their shifting experience. The SRAM Red eTAP Blip Clamp Remote Shifter Mounts offer a secure and ergonomic solution for mounting Blips on 31.8mm handlebars, providing easy access to shifting controls. A key consideration is that these mounts are specifically designed for 31.8mm handlebars, so ensure your handlebars fit this size for compatibility.
All features
| Model Part Number | 00.3018.098.000 |
|---|---|
| Brand | SRAM |
Extended Product Information
FAQs
What tools are needed for installation?
A hex wrench (likely 2.5mm or 3mm, check your SRAM eTap documentation) is typically required for tightening the clamp.
Are these mounts compatible with other handlebar sizes?
No, they are only compatible with 31.8mm handlebars.
Can I reuse the mounts if I change handlebars?
Yes, if the new handlebars are also 31.8mm in diameter.
How do I route the Blip cables?
Follow the cable routing instructions provided with your SRAM eTap groupset.
What material are the mounts made of?
They are made of Polypropylene.
What is the weight of the mounts?
The pair weighs approximately 12 grams.
Can I adjust the position of the mounts?
Yes, the clamp allows for some adjustment of the mount's position on the handlebar.
Troubleshooting
Blips are loose or moving.
Check and tighten the clamp on the mount. Ensure the Blip is securely inserted.
Difficulty shifting.
Check Blip cable routing for interference and ensure proper connection to the eTap system.
Mount doesn't fit the handlebars.
Verify that your handlebars are 31.8mm in diameter.
Pros and Cons
Pros
- Provides a clean and secure mounting solution for Blips.
- Improves ergonomics by placing shift controls within easy reach.
- Lightweight design minimizes impact on overall bike weight.
- Easy to install and adjust.
- Durable construction ensures long-lasting performance.
Cons
- Only compatible with 31.8mm handlebars.
- Requires specific placement for optimal use.
- Additional component to consider when setting up the bike.
- May require re-taping of handlebars after installation.
Setup, Compatibility & Care
Setup
- Identify the correct mount for each side (marked L/R).
- Position the mount on the 31.8mm section of your handlebars, outside the tape zone.
- Insert the Blip into the mount and secure with the clamp.
- Route the Blip cable to your eTap system.
- Tighten the clamp to the recommended torque specification (check manufacturer's guide).
Compatibility
- Compatible with SRAM RED eTap groupsets.
- Designed for 31.8mm handlebars.
- Compatible with 11-speed systems.
Care
- Clean with a damp cloth.
- Inspect regularly for damage.
- Ensure the clamp remains tight to prevent movement.