HydroSure WRAS Approved Female Adaptor Compression Fitting 25mm x 1" - Blue

WRAS (Water Regulations Advisory Scheme) approval signifies that the product has been rigorously tested and meets the high standards set by UK water regulations for products used in contact with drinking water, ensuring it is safe and does not waste water.

This fitting is designed to withstand working pressures up to 16 bar.

Yes, the WRAS approval indicates it is suitable for use with potable (drinking) water systems.

It is designed to connect to 25mm metric pipes, commonly polyethylene (PE) pipes used in plumbing and irrigation.

Ensure the 25mm pipe end is clean, cut squarely, and inserted fully into the fitting before tightening the compression nut securely. Check the o-ring for damage.

Yes, constructed from durable, UV-stabilised material, it is suitable for outdoor and underground applications where it is protected from direct sunlight degradation.

Typically, a pipe cutter (for a clean pipe end) and a wrench to tighten the compression nut are sufficient. Hand-tightening followed by a 1 to 1.5 wrench turn is recommended.

Ensure the pipe is cut squarely, fully inserted, and the compression nut is tightened correctly. Check for damage to the pipe or o-ring.

Verify the threads are clean and compatible. Ensure a suitable thread sealant tape (PTFE tape) is used and the connection is adequately tightened.

Re-evaluate the pipe end preparation and ensure it is clean, smooth, and fully inserted before tightening the compression nut.

Confirm you are using the correct size pipe (25mm). Ensure the pipe end is not deformed. Lubricating the o-ring with a small amount of water can help insertion.