Best current price£109.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£109.99Visit shop Loops Industrial Mig Gas Regulator Kit With Gauge - 1.5M Hose Length - Mig Conversion
Visit shop
B&Q£112.49Visit shop - Heavy-Duty Industrial Mig Gas Regulator Kit With 1.5M Hose For Conversion
Visit shop4 offers from £109.99 - £118.11
View price history by clicking the chart icon.
This Industrial MIG Gas Regulator Kit is designed for welders, both DIY and professional, who need to efficiently connect industrial-sized gas cylinders to their welding setups using smaller hosing. Its key benefit is enabling seamless conversion for accurate pressure control with a reliable single gauge regulator and a 1.5m hose for extended reach. A minor consideration is its specific use for industrial gas setups, requiring compatible cylinders.
| Model Part Number | AK9 |
|---|---|
| Brand | Loops |
This regulator is designed for industrial-sized gas cylinders typically used for MIG welding, such as Argon, CO2, or mixed gases. It facilitates the conversion from smaller hosing to these industrial cylinder types.
The 1.5m hose connects to the regulator's outlet port. Depending on your specific hose and regulator configuration, you may need the MIG Gas Hose Adaptor (Model No. AK9) for a secure fit.
No, this regulator is specifically designed for industrial-sized gas cylinders and larger connections. It may not be compatible with smaller disposable canisters without additional, specific adapters not included in this kit.
The single gauge on this regulator shows the output pressure, allowing you to accurately set and monitor the gas flow rate to your welding torch, which is crucial for achieving optimal weld quality.
Replacement parts like the Bull Nose Adaptor (Model No. 120/432102) and the MIG Gas Hose Adaptor (Model No. AK9) can be sourced through our product listings or by contacting customer support for assistance.
The regulator kit is lightweight, weighing approximately 0.82kg, making it easy to handle and transport.
Check that the cylinder valve is fully open. Ensure the regulator is properly seated on the cylinder valve. Verify that the hose connections are secure at both the regulator and the welding machine. Check if the cylinder has sufficient gas pressure.
Ensure the regulator is not damaged. If the gauge appears faulty, it may need replacement. Check for any leaks in the system that could affect readings.
Apply a leak detection solution (soapy water) to all connections (cylinder to regulator, regulator to hose, hose to machine). Tighten any leaking connections. If a leak persists from the regulator body or gauge, the regulator may need servicing or replacement.
Ensure the cylinder valve is open. Check that the adjustment knob is functioning correctly. If the regulator is old or has been subjected to impact, internal components may be damaged, requiring replacement.
Setup:
Compatibility:
Care:
