Best current price£70.00from Merlin Cycles
Shopping.co.uk recommended and popular offers
Merlin Cycles£70.00Visit shop Schwalbe Black Shredda Radial Gravitry Pro Ultra Soft Folding Front Mtb Tyre - 29" - / 29" / 2.5" / Folding / Tubeless
Visit shop3 offers from £70.00 - £73.99
View price history by clicking the chart icon.
The Schwalbe Shredda Front Gravity Pro is designed for aggressive downhill riding, offering exceptional grip and control on steep inclines and challenging terrain. Its radial carcass maximizes ground contact for enhanced traction and comfort, while the open tread pattern excels on soft surfaces. A key caveat is its specialized design, which may not be optimal for general trail riding or long climbs.
| Model Part Number | 11654553 |
|---|---|
| Brand | Schwalbe |
It is best suited for gravity-focused disciplines like downhill and enduro. While it can be used on aggressive trail bikes, its weight and rolling resistance may not be ideal for general trail riding or long climbs.
While designed as a front tire for maximum grip and control, some riders may choose to use it on the rear for specific conditions or setups. However, its tread pattern and compound are optimized for front-end performance.
The Addix Ultra Soft compound provides the maximum possible grip, especially in challenging downhill and wet conditions. It offers superior traction and confidence at the expense of slightly higher rolling resistance and potentially faster wear on abrasive surfaces.
You will need a tubeless-ready rim, tubeless rim tape, tubeless valve, and tubeless sealant. Install the tape, valve, mount the tire, add sealant, and inflate until the bead seats securely.
A folding bead uses flexible Aramid fibers, making the tire lighter and easier to pack. A wire bead uses steel, making it stiffer and often less expensive but heavier and not packable.
The radial carcass allows the tire to conform better to the terrain, increasing the contact patch with the ground. This results in significantly improved grip, comfort, and control by filtering out irregularities.
Ensure rim tape is correctly installed and intact. Check that the valve stem is properly seated. Add or top up tubeless sealant. Ensure the tire bead is fully seated all around the rim.
Use soapy water on the tire bead and rim. Ensure the tire is at room temperature. Try inflating with a high-volume compressor or CO2 cartridge to rapidly seat the bead.
Confirm correct tire pressure for your weight and riding conditions. Ensure the radial carcass is functioning as intended by not over-inflating.
This tire is optimized for softer conditions. Consider a different tire compound or tread pattern for primarily hardpack use. Ensure tire pressure is not too high.
Setup: This is a Tubeless Ready (TLR) tire. Ensure you have a compatible tubeless rim and rim tape. Use a tubeless sealant according to the manufacturer's instructions. Mount the tire onto the rim, ensuring the bead seats properly on both sides. For best results, use a tubeless-specific tire lever if needed.
Compatibility: Designed for 29-inch wheel sizes with a 2.50-inch width. Ensure your frame and fork have sufficient clearance for this tire size, especially in muddy conditions. Compatible with most modern mountain bike rims designed for tubeless use.
Care: After riding, clean the tire with water to remove mud and debris. Periodically check tire pressure and inspect for any cuts or damage. For TLR setups, ensure sealant levels are maintained as recommended.
