Best current price£19.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.99Visit shop B&Q - 2 X 400 Ml Plastic Adhesion Promoter PrimerFor BumpersCar TrimPpPeEpdm & Abs
Visit shop1 offer from £19.99
View price history by clicking the chart icon.
The SolaDirect Plastic Adhesion Promoter Primer is an essential tool for automotive enthusiasts and professionals looking to achieve a factory-quality paint finish on difficult plastic surfaces such as bumpers and exterior trim. Designed to ensure long-lasting bonding between plastics like PP, PE, EPDM, and ABS and subsequent paint layers, it offers a high-coverage, quick-drying solution for complex refinishing projects. While highly effective, it requires precise surface preparation and specific ambient temperatures to ensure optimal chemical performance and coating durability.
| Model Part Number | 1415578 |
|---|---|
| Brand | SolaDirect |
| Container Volume | 800 |
This product is specifically formulated for plastics like PP, PE, and EPDM. It is not designed to replace standard metal primers.
For optimal performance, the application environment should be +18°C or higher.
While the promoter enhances adhesion, light sanding is recommended to remove surface contaminants and improve mechanical grip.
Refer to the specific timeframe on the product label, as curing times can vary based on ambient humidity and temperature.
Yes, it can be used on interior plastics, provided the area is well-ventilated during application and drying.
The surface was likely not degreased thoroughly enough; remove the failed layer, clean with a high-quality solvent, and re-apply.
Maintain a distance of 20-30 cm from the surface and use light, overlapping passes rather than holding the nozzle in one spot.
The ambient temperature may be too low; move the project to a warmer area (at least +18°C) to allow for complete solvent evaporation.
For the best results, start with a clean surface: remove all wax, road grime, and silicones using a dedicated automotive degreaser. If the surface is rough, lightly sand it before cleaning. Apply the spray in an environment where temperatures are +18°C or higher to ensure the chemical bonding agents activate correctly. Always store the canister in a cool, dry place away from direct sunlight. Before use, shake the can vigorously to ensure the internal components are properly mixed. Protect surrounding areas from overspray, as the adhesion-promoting properties can be difficult to remove if applied to unintended surfaces.
