Ultra Beam Lighting 9 Watt Anti Glare Recessed Spotlight - Multicolor

Compact 9-watt recessed spotlight engineered to eliminate glare through deep-set bulb design and b...

Best current price£29.64from B&Q

All Offers

2 offers from £29.64 - £35.99

View price history by clicking the chart icon.

B&QB&Q - Ultrabeam 9 Watt Anti Glare Recessed Spotlight
Free delivery in 1–3 days
£29.64
Visit shop
Wayfair UKUltraBeam 9 Watt LED Anti Glare Recessed Ceiling Spotlight - 800 Lumens
£4.99 delivery
£35.99
Visit shop

Product Information

Full details

The Ultra Beam Lighting 9 Watt Anti Glare Recessed Spotlight is designed for homeowners and interior designers seeking refined, ambient lighting that prioritizes visual comfort. With its 800-lumen output and specialized deep-set bulb geometry, this fixture excels at providing broad, shadow-free illumination for modern living spaces. While it offers a sophisticated aesthetic, users should note that the specific 75mm cut-out requirement and 49mm recess depth necessitate careful planning during the installation phase to ensure compatibility with existing ceiling structures.

All features

ColourMulticolor
Model Part NumberLDC735
BrandUltra Beam Lighting

Extended Product Information

FAQs

Can this spotlight be used with a dimmer switch?

While the spotlight is efficient, check your specific dimmer compatibility with LED drivers to ensure smooth performance.

What is the recess depth requirement?

The fixture requires a minimum of 49mm of clear depth within the ceiling void.

Is the light output too bright for a bedroom?

At 800 lumens, it is quite bright. We recommend using a dimmer or spacing them appropriately for smaller rooms.

Does it come with an external driver?

The product is designed as an integrated unit; please refer to the included installation manual for wiring specifics.

Can I install this in a bathroom?

Unless specified as IP-rated for wet zones, this unit is intended for dry, indoor living spaces.

Troubleshooting

Light fails to illuminate

Verify that the wiring connections are secure and that the circuit breaker has not tripped.

Fixture does not sit flush against the ceiling

Check the cut-out diameter; if the hole is smaller than 75mm, the clips may be obstructed by the ceiling material.

Pros and Cons

Pros

  • Significantly reduces glare compared to standard spotlights
  • Energy-efficient 9W operation
  • Sleek, minimalist design blends into ceilings
  • Broad, even light distribution
  • Compact form factor suitable for shallow voids

Cons

  • Requires specific 75mm circular ceiling cut-out
  • Cannot be installed in spaces with less than 49mm of recess depth
  • Fixed beam angle may not suit all accent lighting needs

Setup, Compatibility & Care

Installation requires a precise 75mm hole in the ceiling material. Before beginning, ensure the ceiling void has a clear space of at least 49mm to house the internal components.

  1. Ensure power is disconnected at the main breaker before starting.
  2. Use a hole saw to cut the 75mm diameter aperture.
  3. Connect the wiring according to local electrical codes.
  4. Gently press the spring-loaded clips to insert the spotlight into the cut-out.

For care, periodically wipe the external trim with a dry, soft cloth. Avoid using abrasive cleaners or solvents on the white finish or the internal black reflector to maintain the anti-glare properties.

Price History

DatePrice
Visit shop