Best current price£29.70from eBay
Shopping.co.uk recommended and popular offers
eBay£29.70Visit shop 3M Wet or Dry TRI-M-ITE 400grit Sand Paper 01975 Abrasive Wet & Dry Sheets Pk 25
Visit shop3 offers from £29.70 - £32.34
View price history by clicking the chart icon.
The 3M Wet or Dry TRI-M-ITE sanding sheets are professional-grade abrasives designed for DIYers and automotive professionals who require a high-quality, consistent finish on intricate surfaces. These sheets excel at surface preparation and automotive refinishing, providing superior longevity and a uniform cut; however, users should be aware that the 400-grit classification is specifically intended for medium-fine sanding, meaning it is too abrasive for final polishing stages but perfect for smoothing out primer or light imperfections.
| Model Part Number | 01975 |
|---|---|
| Brand | 3M |
Yes, 400-grit is excellent for light sanding between coats of lacquer or varnish to ensure a smooth finish.
While not required, a drop of mild dish soap in your water can help reduce surface tension and keep the paper from clogging.
No, these sheets are designed for hand sanding and lack the hook-and-loop or adhesive backing required for power tools.
Wet sanding is preferred for automotive finishes to reduce airborne dust and heat, while dry sanding is typically better for raw wood or metal.
These minerals provide a more consistent cut and longer-lasting sharpness compared to conventional abrasive materials.
Switch to a wet sanding technique if the material allows, or frequently tap the paper against a hard surface to clear dust.
Ensure the surface is clean before beginning and consider switching to a finer grit (600+) for a smoother final finish.
Use a proper sanding block to support the paper and avoid sharp edges that can puncture the backing material.
To get the most out of your 3M TRI-M-ITE sheets, pair them with a firm rubber or foam sanding block to ensure even pressure distribution. For wet sanding, soak the paper in water for a few minutes before the first use, or continuously apply a light mist of water to the workpiece while sanding to clear debris. Always rinse the sheets thoroughly after use to remove trapped particles and allow them to air dry completely before storage to prevent fiber degradation. Store sheets flat in a cool, dry environment to maintain the integrity of the abrasive backing.
