AGV K5 S Cheek Pads - XXL

No, these cheek pads are specifically designed and sized for the AGV K5 S helmet model in XXL. Compatibility with other AGV models or sizes is not guaranteed.

It is recommended to replace cheek pads when they show signs of significant wear, compression, or odor, or if the helmet fit feels loose. This can typically range from every 1-3 years depending on usage and care.

While not strictly necessary, you can gently hand wash them with mild soap and cold water and ensure they are completely air-dried before installation. Avoid machine washing or harsh detergents.

Cheek pads primarily affect fit and comfort. While a secure fit can reduce unwanted air ingress, they do not directly influence the helmet's primary ventilation system.

Warranty information for replacement parts typically varies. Please refer to the documentation provided with your original helmet purchase or contact AGV customer support for specifics on replacement part warranties.

A loose fit can also be caused by wear in the helmet liner or retention system. If replacing the cheek pads does not resolve the issue, the helmet itself may need inspection or replacement.

Ensure you have the correct XXL size for the AGV K5 S helmet. Check that all snaps are fully engaged and tabs are properly tucked into place. If pads are new, they might feel snug initially but should conform with use.

Consult your AGV K5 S helmet manual for specific removal instructions. Be gentle to avoid damaging the helmet liner. Sometimes, a slight rocking motion or specific release point is required.

New pads are often firmer than worn ones and may require a break-in period. Wear the helmet for short periods initially. If still uncomfortably tight after several uses, double-check that the correct XXL size was installed and that no extra material is bunched up.