Shimano FC-M4000 Alivio Chainring - 40T
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Shimano FC-M4000 Alivio 40T outer chainring is designed for mountain bike enthusiasts and commuters utilizing a 9-speed triple drivetrain who need a reliable, high-performance replacement for their worn-out components. This genuine Shimano replacement ensures precise shifting and efficient power transfer, though it is specifically engineered for the FC-M4000 crankset and may not be compatible with other crank models.
All features
| Model Part Number | Y1PL98050 |
|---|---|
| Brand | SHIMANO |
Extended Product Information
FAQs
Will this fit an FC-M430 crankset?
No, this is specifically designed for the FC-M4000. It may not align correctly with the bolt pattern of older models.
Do I need to replace my chain when installing this?
It is highly recommended to replace your chain when installing a new chainring to prevent premature wear on the new teeth.
Does this include mounting bolts?
No, this product is for the chainring only. You should reuse your existing mounting hardware.
Can I use this on a 10-speed drivetrain?
This chainring is optimized for 9-speed chains; it may not provide optimal performance or spacing with 10-speed components.
Which way should the chainring face?
Ensure the side with the shift pins and ramps faces toward the bike frame for proper gear transition.
Troubleshooting
Chain skipping under load
Check if your chain is also worn. A new chainring often requires a new chain to mesh correctly.
Poor shifting between rings
Verify the front derailleur height and alignment after installation to match the new chainring profile.
Pros and Cons
Pros
- Ensures exact OEM fit for FC-M4000 cranksets
- High-quality steel construction for increased wear resistance
- Restores smooth and reliable shifting performance
- Maintains manufacturer standards for power transfer
Cons
- Compatible only with the FC-M4000 crankset
- Requires specific tools for installation
- Limited to 9-speed triple drivetrain configurations
Setup, Compatibility & Care
To install this chainring, you will need a set of hex keys or a dedicated chainring bolt tool. Ensure the crankset is removed or accessible enough to allow the bolts to be loosened. Align the mounting tabs on the new chainring with the crank arm holes, ensuring the shift pins on the chainring are facing the inner side (towards the frame).
Maintenance: Clean the chainring regularly with a degreaser to prevent grit buildup, which accelerates wear. Periodically check that your chainring bolts are tight to prevent creaking or movement. Compatibility is restricted to the Shimano FC-M4000 triple crankset.