Farécla G3W501 Liquid Wax

Its primary purpose is to provide a durable, high-gloss finish and protection for fully cured paintwork.

The protection offered by G3W501 typically lasts for up to 3 months.

No, this wax is specifically for fully cured paintwork. Do not use it on fresh or uncured paint.

The product comes in a 500ml package.

Yes, it is suitable for all types of fully cured paintwork.

Shake well, apply a small amount to an applicator pad, spread evenly in a thin layer, allow to haze, and then buff off with a microfiber cloth.

Mask off trim before application or wipe any residue off immediately with a damp cloth before it dries.

This may indicate the wax was applied too thickly, or not allowed to haze sufficiently. Apply less product next time and ensure it has hazed properly before buffing. If streaking occurs, re-buff the affected area with a clean microfiber cloth.

Ensure the paint surface was clean and properly prepared before application. The surface must be fully cured. Re-apply a thin, even coat, allowing it to haze correctly, and buff with a clean microfiber cloth.

Avoid applying the wax directly onto unpainted plastic or rubber trim. Use masking tape to protect these areas, or carefully wipe any overspray off trim immediately after application with a damp cloth before it dries.