Shimano Disc Brake Pads - Resin - Steel Back - G03S

Replacement frequency depends on riding conditions and usage. Inspect the pads regularly and replace them when the material is worn down to the wear indicator or when performance degrades.

No, these pads are compatible with specific Shimano brake models. Check the compatibility list in this guide or on the product packaging.

Resin pads offer quieter operation and better modulation, while metallic pads provide more aggressive braking and are more durable in wet conditions.

Perform several moderate braking applications from a moderate speed to bed in the pads, avoiding hard stops until they are fully seated.

It is not recommended to mix different types of brake pads (resin and metallic) within the same brake caliper.

Squealing can be caused by contamination, misalignment, or worn pads. Clean the rotor and pads, ensure proper alignment, and check pad wear.

Overheating can reduce braking performance. Avoid prolonged braking on steep descents and allow the brakes to cool down if they overheat.

Clean the rotor and pads with isopropyl alcohol. Ensure the pads are correctly aligned.

Check for pad wear and replace if necessary. Bleed the brake system to remove air. Ensure the rotor is not contaminated.

Bleed the brake system to remove air bubbles.