Design Engineering Spray On Boom Mat - Eliminates Noise & Dampens Vibration

The standard sheet Boom Mat measures 12.5'' x 11.5'' (318 x 292mm). The spray-on version is a liquid applied product.

While primarily designed for interior use, the corrosion-resistant nature of the material allows for exterior application where noise or vibration is a concern, provided the surface is properly prepared and protected from direct, prolonged environmental exposure.

Coverage varies greatly depending on the area treated and the number of coats applied. It is recommended to purchase enough to cover your intended application area, potentially starting with one or two cans and assessing the need for more.

It can help dampen low-frequency exhaust drone, especially when applied to floor pans or near the firewall. However, for severe exhaust noise, it may need to be used in conjunction with other sound-deadening solutions.

Once fully cured, the Boom Mat can typically be painted over, although testing on a small, inconspicuous area is recommended first to ensure compatibility with your chosen paint.

The best method is to use a degreaser specifically designed for automotive surfaces. Ensure all residue is wiped away with a clean cloth, and allow the surface to dry completely before application.

Ensure the surface was thoroughly cleaned and degreased before application. Reapply after proper surface preparation.

Shake the can vigorously before and during use. Ensure the nozzle is not clogged. Test spray on a scrap surface first.

Ensure application in a well-ventilated area and within the recommended temperature range. Excessive humidity or cold can slow drying.

Apply additional coats, ensuring proper drying time between layers. Verify that all major sources of noise and vibration have been treated.