10,000 Lumens Rechargeable Torch - Haltons - Black

Use the included USB-C cable to connect the torch to a power source. A full charge takes approximately 5 hours.

The torch provides up to 12 hours of consistent brightness on a single charge, depending on the mode used.

Yes, the torch has an IP67 rating, which means it is protected against dust, water, and liquids.

The torch features High, Medium, Low, Strobe, and SOS modes.

Yes, it can be used as an emergency power bank to charge your phone or other USB devices.

Twist the torch head to adjust the beam focus from a wide floodlight to a focused spotlight.

Please refer to the product packaging or retailer for warranty details.

Use a soft, damp cloth to clean the torch. Avoid harsh chemicals.

Check if the battery is charged. Try charging the torch using a different USB-C cable and power source. Ensure the power button is fully pressed.

Charge the torch fully. If the issue persists, the battery may need replacement. Check for any obstructions in the lens.

Use the original charging cable or a high-quality USB-C cable. Ensure the power source provides sufficient power (at least 1A). Try a different power outlet.

Cycle through the modes by pressing the power button repeatedly. If the issue persists, the control switch may need to be reset. If the torch was dropped, it may need to be checked for internal damage.

Ensure that the adjusting ring is clean. Apply a small amount of lubricant (silicone-based) to the threads.