D-C-Fix Micro Cement Dark Grey Self-Adhesive Vinyl Wall Tiles - 0.14Sqm

These tiles are best applied to smooth, flat surfaces. Textured wallpaper may prevent proper adhesion and show through the vinyl.

While the material is vinyl, always check manufacturer guidelines for heat resistance if placing directly behind a heat source like a hob. Ensure adequate ventilation and clearance as per hob instructions.

With proper installation and care, these self-adhesive vinyl tiles can provide a durable finish for several years in appropriate environments.

You can reposition tiles shortly after application if you lift them carefully. However, repeated removal and reapplication may weaken the adhesive.

A sharp craft knife or utility knife, a ruler or straight edge, and a soft cloth for smoothing are typically all that's needed.

This product is sold in packs covering 0.14 square meters. The exact dimensions of individual tiles within the pack are not specified but are designed to cover this area.

The tiles are waterproof and suitable for typical bathroom humidity and splashes. However, they are not designed for direct, prolonged exposure to steam or water, and should not be used inside shower cubicles.

Ensure the surface is thoroughly cleaned, dried, and free from dust or grease. Press firmly during application and ensure edges are sealed.

Carefully lift the tile before it adheres fully and reapply, smoothing out any trapped air. If already adhered, use a pin to prick the bubble and smooth down.

Ensure the existing tiles are completely flat. For slightly uneven surfaces, a very thin layer of filler might be needed before application, or consider a thicker tile design if available.

Use a sharp craft knife or utility knife and a straight edge for clean cuts. Score the vinyl multiple times rather than trying to cut through in one go.